Успешное применение, без комментариев [CM2MTK MediaTek] - Страница 5 - GSM Форум

**fedja** · 10.05.2016, 21:14

Bravis A401 Neo FRP снес мгновенно)))

Лог

AGrishutin · 12.05.2016, 09:50

Билайн Смарт 6 Google Reset Protection - удалил без проблем.
P.S. логов нет

**gulka** · 13.05.2016, 14:23

BQ BQS-4516 SINGAPORE Прошивка

Operation : Read Flash [ v1.47 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E355530304D02C2F46E2730F1
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004E355530304D02C2F46E2730F1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 428157511D165B56A841A6E9055A9A1A
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : Device
ProdName  : ratech72_we_72_rlk_kk
ProdModel : BQS-4516
Device    : ratech72_we_72_rlk_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

[Read Ok] : preloader_ratech72_we_72_rlk_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / ratech72_we_72_rlk_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 724 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6572__Device__BQS-4516__ratech72_we_72_rlk_kk__4.4.2__ALPS.KK1.MP6.V1\

All done!

Done!
Elapsed: 00:04:00
Reconnect Power/Cable!

**jblack** · 17.05.2016, 10:40

Fly FS402

Operation : Check / Read Info [ v1.47 ]

Operation : Read Flash [ v1.47 ]

Operation : Read NVRAM [ v1.47 ]

Operation : Format FileSystem [ v1.47 ] FPR ( RESET PROTECTION )

**gulka** · 22.05.2016, 11:21

Lenovo A616 ПРОШИВКА

Operation : Read Flash [ v1.47 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6752
BB_CPU_NME : [MediaTek] MT6732|MT6752_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8F
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463558354342010022C20B1229
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BC5X5
[eMMC] : FLASH_CID : 150100463558354342010022C20B1229
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 721907B19D884787450BD6C2E50A022A
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Lenovo
ProdName  : A616
ProdModel : Lenovo A616
Device    : A616
AndroidVer: 4.4.4
MTKxCPU   : MT6752
MTKxPRJ   : ALPS.KK2.MP13.V1.1

[Read Ok] : preloader_lcsh6752_lwt_cu.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6752 / V1.1.2 / lcsh6752_lwt_cu / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1347 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6752__Lenovo__Lenovo_A616__A616__4.4.4__ALPS.KK2.MP13.V1.1\

All done!

Done!
Elapsed: 00:04:56
Reconnect Power/Cable!

**gulka** · 29.05.2016, 16:29

Lenovo S660W ПРОШИВКА

Operation : Read Flash [ v1.47 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 3701FF454D4330344710350063EA8153
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x37 , OEM : 01FF
[eMMC] : FLASH_INF : [NOT_IN_BASE] , G40CM
[eMMC] : FLASH_CID : 3701FF454D4330344710350063EA8153
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 404B2489640FD1FCEBD6D779DD295018
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     :  Lenovo
ProdName  :  Lenovo
ProdModel :  Lenovo S660w
Device    :  Lenovo
AndroidVer: 4.4.3
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.JB3.MP.V1.30

[Read Ok] : preloader_yuanda72_wet_a_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / yuanda72_wet_a_jb3 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 681 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6592___Lenovo___Lenovo_S660w___Lenovo__4.4.3__ALPS.JB3.MP.V1.30\

All done!

Done!
Elapsed: 00:06:07
Reconnect Power/Cable!

**gulka** · 31.05.2016, 13:37

BQS-5505 AMSTERDAM Прошивка

Operation : Read Flash [ v1.48 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 700100563130303038501E8ABC4523E7
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100563130303038501E8ABC4523E7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID    : 0x0B8CD294CCC9815F897328B618784D47
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : BQ
ProdName  : full_w825_648_aw_loq_t97_oukitel
ProdModel : BQS_5505
Device    : w825_648_aw_loq_t97_oukitel
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : T825w_648_AW_BQS_5505_V2.0

[Read Ok] : preloader_w825_648_aw_loq_t97_oukitel.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / w825_648_aw_loq_t97_oukitel / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1532 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6580__BQ__BQS_5505__w825_648_aw_loq_t97_oukitel__5.1__T825w_648_AW_BQS_5505_V2.0\

All done!

Done!
Elapsed: 00:06:18
Reconnect Power/Cable!

**gulka** · 01.06.2016, 12:27

LG Leon H324 ПРОШИВКА 10F

Operation : Read Flash [ v1.48 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 195 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A57374D42031E16C2F4727F
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM7WJ
[eMMC] : FLASH_CID : 150100464A57374D42031E16C2F4727F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x418A47633B5C8715F40F842294A5226F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : lge
ProdName  : my50ds_global_com
ProdModel : LG-H324
Device    : my50ds
AndroidVer: 5.0.1
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP1.TC1SP.V1.4_MUSE6582.Y50.L_TMP2

[Read Ok] : preloader_muse6582_y50_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : uboot.bin
[Read Ok] : ubootbak.bin
[Read Ok] : laf.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : EBR3
[Read Ok] : persist.img
[Read Ok] : cust.img
[Read Ok] : factory.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / muse6582_y50_l / EMMC
Android Info saved
FW Size : 1624 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6582__lge__LG-H324__my50ds__5.0.1__ALPS.L0.MP1.TC1SP.V1.4_MUSE6582.Y50.L_TMP2\

All done!

Done!
Elapsed: 00:07:16
Reconnect Power/Cable!

**gulka** · 02.06.2016, 12:25

Iphone 6S MT6735 Прошивка

Operation : Read Flash [ v1.48 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4400014530303153CCB30138796DB43D
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 8001S
[eMMC] : FLASH_CID : 45010044533130303801B3CC3DB4C279
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xE50F64F1A97F02B196B04A018BF65B11
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : APPLE
ProdName  : 6S
ProdModel : 6S
Device    : 6S
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_LENTK6735M.65C.L1_P30

[Read Ok] : preloader_lentk6735m_65c_l1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / lentk6735m_65c_l1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1955 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6735__APPLE__6S__6S__5.1__ALPS.L1.MP3.V2_LENTK6735M.65C.L1_P30\

All done!

Done!
Elapsed: 00:04:33
Reconnect Power/Cable!

**JayDi** · 02.06.2016, 13:07

Поддержка упаковки EXT'ов :
было :

Код:

 
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / c239v55_dx_lite / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3507 MiB
Scatter saved to : E:\MT6755__Elephone__P9000_Lite__Elephone__6.0__alps-mp-m0.mp7-V1_even6755.65u.m\

стало :

Код:

 
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

Compressing and convert images ... 
[Convert Ok] : system.img ( Ratio : 66% ) 
 
[ScatCFG] : MT6755 / V1.1.2 / c239v55_dx_lite / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2321 MiB
Scatter saved to : E:\MT6755__Elephone__P9000_Lite__Elephone__6.0__alps-mp-m0.mp7-V1_even6755.65u.m\

Из плюсов :
шьется на упакованное количество процентов быстрее
занимает меньше места на диске
проверка для 65хх и большинства 67хх проходит в 4-20 раз быстрее
Для Alcatel - процент упаковки еще выше стал Х) Раза в два меньше теперь

**gulka** · 02.06.2016, 17:59

Цитата:

Сообщение от JayDi

Поддержка упаковки EXT'ов :
было :

Код:

 
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / c239v55_dx_lite / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3507 MiB
Scatter saved to : E:\MT6755__Elephone__P9000_Lite__Elephone__6.0__alps-mp-m0.mp7-V1_even6755.65u.m\

стало :

Код:

 
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

Compressing and convert images ... 
[Convert Ok] : system.img ( Ratio : 66% ) 
 
[ScatCFG] : MT6755 / V1.1.2 / c239v55_dx_lite / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2321 MiB
Scatter saved to : E:\MT6755__Elephone__P9000_Lite__Elephone__6.0__alps-mp-m0.mp7-V1_even6755.65u.m\

Из плюсов :
шьется на упакованное количество процентов быстрее
занимает меньше места на диске
проверка для 65хх и большинства 67хх проходит в 4-20 раз быстрее
Для Alcatel - процент упаковки еще выше стал Х) Раза в два меньше теперь

А минусы есть?
Другой софт поймет такие файлы?

**JayDi** · 02.06.2016, 20:33

SPFT естественно поймет. Теперь CM2 делает не просто бэкап, а полноценный образ как с "завода".

uploads · 03.06.2016, 22:32

Read FlashLG K5 X220ds

Read Flash

**gulka** · 04.06.2016, 16:51

LG Spirit H422 Прошивка

Operation : Read Flash [ v1.48 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 195 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501005137585341420BF784DA886277
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 1501005137585341420BF784DA886277
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x562CD3FEA6C82102CADEA479337E44F2
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : lge
ProdName  : my70ds_global_com
ProdModel : LG-H422
Device    : my70ds
AndroidVer: 5.0.1
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP1.TC1SP.V1.4_MUSE6582.Y70.L_TMP2

[Read Ok] : preloader_muse6582_y70_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : uboot.bin
[Read Ok] : ubootbak.bin
[Read Ok] : laf.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : EBR3
[Read Ok] : persist.img
[Read Ok] : lgfota.img
[Read Ok] : cust.img
[Read Ok] : factory.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / muse6582_y70_l / EMMC
Android Info saved
FW Size : 2720 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6582__lge__LG-H422__my70ds__5.0.1__ALPS.L0.MP1.TC1SP.V1.4_MUSE6582.Y70.L_TMP2\

All done!

Done!
Elapsed: 00:11:31
Reconnect Power/Cable!

uploads · 04.06.2016, 23:13

LG X135

Read Flash

uploads · 05.06.2016, 12:31

Успешно прочитан графический ключ Lenovo A328

лог

**gulka** · 05.06.2016, 15:22

4Good S450m 4G прошивка

Operation : Read Flash [ v1.48 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 56000170303030317D0D50386FE38E2F
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100563130303038500D7D2F8EB26F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID    : 0x3F16E0570FFB1B6BAC2AACE1661694C7
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : 4Good
ProdName  : 4Good S450m 4G
ProdModel : 4Good S450m 4G
Device    : 4Good S450m 4G
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_LENTK6735M.65U.L1_P37

[Read Ok] : preloader_lentk6735m_65u_l1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / lentk6735m_65u_l1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2360 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6735__4Good__4Good_S450m_4G__4Good_S450m_4G__5.1__ALPS.L1.MP3.V2_LENTK6735M.65U.L1_P37\

All done!

Done!
Elapsed: 00:05:58
Reconnect Power/Cable!

**gulka** · 11.06.2016, 12:22

Galaxy S6 SM-G920 ПРОШИВКА

Operation : Read Flash [ v1.49 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 4501004453323030380101181F98428B
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 8002S
[eMMC] : FLASH_CID : 4501004453323030380101181F98428B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x0CF0995C0482FD5896D9C5042DFC8007
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : samsung
ProdName  : Galaxy S6
ProdModel : SM-G920
Device    : Galaxy S6
AndroidVer: 5.0.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_CELL6582.WT.L_P7

[Read Ok] : preloader_cell6582_wt_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / cell6582_wt_l / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1305 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6582__samsung__SM-G920__Galaxy_S6__5.0.2__ALPS.L0.MP2.V1_CELL6582.WT.L_P7\

All done!

Done!
Elapsed: 00:09:05
Reconnect Power/Cable!

**gulka** · 11.06.2016, 13:41

Samsung G900 Прошивка

Operation : Read Flash [ v1.49 ]

Код:

Power Off Phone , re-connect battery ,  Insert USB cable!

Wait for phone...
Phone found! [ 6 ]
Sync...
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
DEV RID    : 0xE3C13D752D26CCB7C03D965E05950B22
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

[Read Ok] : preloader_benrui71_e_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6571 / V1.1.1 / benrui71_e_lca / NAND
FW Size : 330 MiB

Brand     : alps
ProdName  : benrui71_e_lca
ProdModel : MT6571
Device    : benrui71_e_lca
AndroidVer: 4.2.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.JB7.MP.V1.14

Android Info saved

Scatter saved to : C:\Users\TIMUR\Desktop\MT6571_NAND_alps__MT6571__benrui71_e_lca__4.2.2__ALPS.JB7.MP.V1.14

Done!
Elapsed: 00:03:31
Reconnect Power/Cable!

**gulka** · 18.06.2016, 14:47

BQ STRIKE BQS-5020 ПРОШИВКА

Operation : Read Flash [ v1.49 ]

Код:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505075155A84E33E5
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505075155A84E33E5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA0AD09217912A0F4AD739F0D2066AC31
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : BQ
ProdName  : BQS-5020
ProdModel : BQS-5020
Device    : BQS-5020
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.W10.24.p0

[Read Ok] : preloader_v3702.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3702 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1571 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6580__BQ__BQS-5020__BQS-5020__6.0__ALPS.W10.24.p0\

All done!

Done!
Elapsed: 00:11:33
Reconnect Power/Cable!

10.05.2016, 21:14	#81
fedja Почетный пользователь Регистрация: 14.02.2007 Адрес: 127.0.0.1 Сообщений: 1,214 Поблагодарил: 1,256 Поблагодарили 3,299 раз за 871 сообщений Репа: 1513	Bravis A401 Neo FRP ( Google Reset Protection ) Bravis A401 Neo FRP снес мгновенно))) Лог Operation : Format FileSystem [ v1.47 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 11 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 11010030303447453001D55D26DAB2B5 Initialize Memory ... DRAM already initialized by Preloader eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x11 , OEM : 0100 [eMMC] : FLASH_INF : [TOSHIBA] , 0EG40 [eMMC] : FLASH_CID : 11010030303447453001D55D26DAB2B5 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000EC000000 [eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB] DEV RID : A2740BF5E11272C1B9C87B2DF999AC52 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Clear FRP ( Google Reset Protection ) Clear Ok! Done!

17.05.2016, 10:40	#84
jblack Администратор Регистрация: 02.08.2004 Адрес: Тридевятое царство Сообщений: 2,210 Поблагодарил: 1,130 Поблагодарили 2,422 раз за 1,091 сообщений Репа: 1993	Fly FS402 Operation : Check / Read Info [ v1.47 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 5 ] Sync... Inital Boot Ok! BB_CPU_PID : 6572 BB_CPU_NME : [MediaTek] MT6572_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x88 NAND Flash : NOT INSTALLED eMMC Flash : 110100303034474530012554448792EF Initialize Memory ... DRAM already initialized by Preloader eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x11 , OEM : 0100 [eMMC] : FLASH_INF : [TOSHIBA] , 0EG40 [eMMC] : FLASH_CID : 110100303034474530012554448792EF [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000EC000000 [eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB] DEV RID : 383D54F4112F0D354EDA3E7AA06B2118 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Done! Elapsed: 00:00:09 Reconnect Power/Cable! Operation : Read Flash [ v1.47 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 5 ] Sync... Inital Boot Ok! BB_CPU_PID : 6572 BB_CPU_NME : [MediaTek] MT6572_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x88 NAND Flash : NOT INSTALLED eMMC Flash : 110100303034474530012554448792EF Initialize Memory ... DRAM already initialized by Preloader eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x11 , OEM : 0100 [eMMC] : FLASH_INF : [TOSHIBA] , 0EG40 [eMMC] : FLASH_CID : 110100303034474530012554448792EF [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000EC000000 [eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB] DEV RID : 383D54F4112F0D354EDA3E7AA06B2118 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... Brand : Fly ProdName : FS402 ProdModel : FS402 Device : Stratus_2 AndroidVer: 5.1 MTKxCPU : MT6572 MTKxPRJ : SW10_FLY_FS402_2015_11_09 [Read Ok] : preloader_hexing6572_wet_l.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : system.img [Make Ok] : cache.img [Make Ok] : userdata.img [ScatCFG] : MT6572 / V1.1.1 / hexing6572_wet_l / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 1880 MiB Scatter saved to : D:\flash\fly\FS402\MT6572__Fly__FS402__Stratus_2__ 5.1__SW10_FLY_FS402_2015_11_09\ All done! Done! Elapsed: 00:08:17 Reconnect Power/Cable! Operation : Read NVRAM [ v1.47 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 5 ] Sync... Inital Boot Ok! BB_CPU_PID : 6572 BB_CPU_NME : [MediaTek] MT6572_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x88 NAND Flash : NOT INSTALLED eMMC Flash : 110100303034474530012554448792EF Initialize Memory ... DRAM already initialized by Preloader eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x11 , OEM : 0100 [eMMC] : FLASH_INF : [TOSHIBA] , 0EG40 [eMMC] : FLASH_CID : 110100303034474530012554448792EF [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000EC000000 [eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB] DEV RID : 383D54F4112F0D354EDA3E7AA06B2118 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [Info] : BaseBand : MT6572_S00_MOLY_WR8_W1449_MD_WG_MP_V5_1_wg_n NVM Read Ok, MT6572_S00_MOLY_WR8_W1449_MD_WG_MP_V5_1_wg_n_eMMC. spnv Done! Elapsed: 00:00:26 Reconnect Power/Cable! Operation : Format FileSystem [ v1.47 ] FPR ( RESET PROTECTION ) 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 5 ] Sync... Inital Boot Ok! BB_CPU_PID : 6572 BB_CPU_NME : [MediaTek] MT6572_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x88 NAND Flash : NOT INSTALLED eMMC Flash : 110100303034474530012554448792EF Initialize Memory ... DRAM already initialized by Preloader eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x11 , OEM : 0100 [eMMC] : FLASH_INF : [TOSHIBA] , 0EG40 [eMMC] : FLASH_CID : 110100303034474530012554448792EF [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000EC000000 [eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB] DEV RID : 383D54F4112F0D354EDA3E7AA06B2118 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Clear FRP ( Google Reset Protection ) Clear Ok! Done! Elapsed: 00:00:14 Reconnect Power/Cable! __________________ В правильно поставленном вопросе содержится большая часть ответа.

03.06.2016, 22:32	#93
uploads Пользователь Регистрация: 17.04.2016 Адрес: Болехів Сообщений: 437 Поблагодарил: 265 Поблагодарили 543 раз за 269 сообщений Репа: 6	Read FlashLG K5 X220ds Read Flash Operation : Read Flash [ v1.48 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 146 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 150100513732534D420007B09096238D Initialize Memory ... DRAM configured from IDB! DRAM initialize passed! DRAM size : 0x40000000 DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BMS27 [eMMC] : FLASH_CID : 150100513732534D420007B09096238D [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000001D2000000 [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB] DEV RID : 0x57645BF9BA7A68E2259B7E2DC75F2CBA INT RAM : 0x00020000 EXT RAM : 0x40000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... USBDL : Init HSUSB Ok! xGPT : Normalize settings Ok! Brand : lge ProdName : d3_global_com ProdModel : LG-X220 Device : d3 AndroidVer: 5.1 MTKxCPU : MT6580 MTKxPRJ : ALPS.L1.MP6.V2.19_ARIMA6580.WE.L_P49 [Read Ok] : preloader_d3.bin [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : logo.bin [Read Ok] : flex.img [Read Ok] : secro.img [Read Ok] : system.img [Make Ok] : cache.img [Make Ok] : userdata.img [ScatCFG] : MT6580 / V1.1.2 / d3 / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 2182 MiB Scatter saved to : C:\Users\1\Desktop\LG K5 X220ds\MT6580__lge__LG-X220__d3__5.1__ALPS.L1.MP6.V2.19_ARIMA6580.WE.L_P4 9\ All done! Done! Elapsed: 00:26:51 Reconnect Power/Cable!

04.06.2016, 23:13	#95
uploads Пользователь Регистрация: 17.04.2016 Адрес: Болехів Сообщений: 437 Поблагодарил: 265 Поблагодарили 543 раз за 269 сообщений Репа: 6	LG X135 Read Flash Operation : Read Flash [ v1.48 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 146 ] Sync... Inital Boot Ok! BB_CPU_PID : 6572 BB_CPU_NME : [MediaTek] MT6572_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x88 NAND Flash : NOT INSTALLED eMMC Flash : 1501004E35585A4D4201E120EAE5C151 Initialize Memory ... DRAM configured from IDB! DRAM initialize passed! DRAM size : 0x20000000 DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BMZX5 [eMMC] : FLASH_CID : 1501004E35585A4D4201E120EAE5C151 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000E9000000 [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB] DEV RID : 0xA467995714B86B11B6FBEB2AEC925E83 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... USBDL : Init HSUSB Ok! Brand : lge ProdName : lo_1_open_ua2 ProdModel : LG-X135 Device : lo_1 AndroidVer: 4.4.2 MTKxCPU : MT6572 MTKxPRJ : LGX135-00-V10c-CIS-XXX-APR-04-2015+0 [Read Ok] : preloader_lo1.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : uboot.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : system.img [Make Ok] : cache.img [Make Ok] : userdata.img [ScatCFG] : MT6572 / V1.1.1 / lo1 / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 1005 MiB Scatter saved to : C:\Users\1\Desktop\X135\MT6572__lge__LG-X135__lo_1__4.4.2__LGX135-00-V10c-CIS-XXX-APR-04-2015+0\ All done! Done! Elapsed: 00:07:24 Reconnect Power/Cable!

05.06.2016, 12:31	#96
uploads Пользователь Регистрация: 17.04.2016 Адрес: Болехів Сообщений: 437 Поблагодарил: 265 Поблагодарили 543 раз за 269 сообщений Репа: 6	Успешно прочитан графический ключ Lenovo A328 лог Operation : Read Pattern/DP Lock [ v1.48 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 146 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 90014A4834473164040506A1CEE1817B Initialize Memory ... DRAM configured from ScatFW! DRAM initialize passed! DRAM size : 0x40000000 DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x90 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , d1G4 [eMMC] : FLASH_CID : 90014A4834473164040506A1CEE1817B [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000000E9000000 [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB] DEV RID : 0xB3E8E489CAC5E406A603DAC6C334574B INT RAM : 0x00020000 EXT RAM : 0x40000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! USBDL : Init HSUSB Ok Reading data ... Get Locks ... PatternLock Sequnce : 1235789 Done! Elapsed: 00:00:27 Reconnect Power/Cable! Миниатюры

12.05.2016, 09:50	#82
AGrishutin Пользователь Регистрация: 01.04.2015 Адрес: ex MobilaGSM, Россия, Донецк, Ростовская область. Сообщений: 68 Поблагодарил: 274 Поблагодарили 64 раз за 27 сообщений Репа: 163	Билайн Смарт 6 Google Reset Protection - удалил без проблем. P.S. логов нет

02.06.2016, 13:07	#90
JayDi Регистрация: 24.02.2007 Адрес: Россия, Москва Сообщений: 792 Поблагодарил: 177 Поблагодарили 1,853 раз за 461 сообщений Репа: 1059	Поддержка упаковки EXT'ов : было : Код: [Read Ok] : secro.img [Read Ok] : system.img [Make Ok] : cache.img [Make Ok] : userdata.img [ScatCFG] : MT6755 / V1.1.2 / c239v55_dx_lite / EMMC Android Info saved HWConfig Info saved FW Size : 3507 MiB Scatter saved to : E:\MT6755__Elephone__P9000_Lite__Elephone__6.0__alps-mp-m0.mp7-V1_even6755.65u.m\ стало : Код: [Read Ok] : secro.img [Read Ok] : system.img [Make Ok] : cache.img [Make Ok] : userdata.img Compressing and convert images ... [Convert Ok] : system.img ( Ratio : 66% ) [ScatCFG] : MT6755 / V1.1.2 / c239v55_dx_lite / EMMC Android Info saved HWConfig Info saved FW Size : 2321 MiB Scatter saved to : E:\MT6755__Elephone__P9000_Lite__Elephone__6.0__alps-mp-m0.mp7-V1_even6755.65u.m\ Из плюсов : шьется на упакованное количество процентов быстрее занимает меньше места на диске проверка для 65хх и большинства 67хх проходит в 4-20 раз быстрее Для Alcatel - процент упаковки еще выше стал Х) Раза в два меньше теперь

02.06.2016, 20:33	#92
JayDi Регистрация: 24.02.2007 Адрес: Россия, Москва Сообщений: 792 Поблагодарил: 177 Поблагодарили 1,853 раз за 461 сообщений Репа: 1059	SPFT естественно поймет. Теперь CM2 делает не просто бэкап, а полноценный образ как с "завода".

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Обновление ПО для NCK Dongle / NCK Box	serpas007	NCK Dongle / NCK Box Team	184	18.02.2023 23:16
Ошибки и обсуждение [CM2MTK MediaTek]	yurii-62	Infinity Box	902	13.01.2021 10:40
Новости и обновления ПО Octopus LG	varalex	Octopus Box	260	12.03.2020 21:33
Применение Infinity PinFinder без карты infinity	Romych78	Infinity Box	5	04.02.2009 12:14
Успешное применение, без комментариев [CM2MTK MediaTek]		Infinity Box	0	01.01.1970 03:00