Nokia E7 прошивается без ошибок но не включается

[Raiv_2]

Телефон небитый и нетопленый, следов влаги нет
Шьётся без проблем, после лого нокиа сразу выключается

Files Set for Flashing :
MCU : RM-626_111.030.0609_79u_prd.core.fpsx
PPM : RM-626_111.030.0609_01.01_Euro1_QW_79u_prd.rofs2.fpsx
PPM2 : RM-626_111.030.0609_00.01_79u_prd.rofs3.fpsx
CNT : RM-626_111.030.0609_U01.01_79u.uda.fpsx
APE : RM626_APE_ONLY_ENO_11w36_v0.037.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0CD00114CCDD0344ED073C79A74572C5A330B134
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving
===Flashing [MCU]===
Erase : Processing RM-626_111.030.0609_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04
Write : Processing RM-626_111.030.0609_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 505 blocks
TIME : Write time : 00:00:19
MCU Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [PPM]===
Erase : Processing RM-626_111.030.0609_01.01_Euro1_QW_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-626_111.030.0609_01.01_Euro1_QW_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 180 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [PPM2]===
Erase : Processing RM-626_111.030.0609_00.01_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-626_111.030.0609_00.01_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 4 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [CNT]===
Erase : Processing RM-626_111.030.0609_U01.01_79u.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:06
Write : Processing RM-626_111.030.0609_U01.01_79u.uda.fpsx
Total writen 561 blocks
TIME : Write time : 00:00:20
CNT Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [APE]===
Erase : Processing RM626_APE_ONLY_ENO_11w36_v0.037.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM626_APE_ONLY_ENO_11w36_v0.037.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 20 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:59
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia E7-00
Software Info: V 79_sr1_11w42.5 25-11-11 RM-626 (c) Nokia
IMEI: 357909043240713
Ape Version: 111.030.0609
Product code: 0591821
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...
AfterFlash operations done ;D
Done!
Elapsed: 00:01:21
Connect phone on selected interface...
Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0CD00114CCDD0344ED073C79A74572C5A330B134
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 8EABFDA6B8A757034233978C16A93B892CE2D4FA
ADL: Reading certificates...
Reading NPC certificate...
IMEI : 357909043240713
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!
ADL: Reading certificates done!
ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot
Wait, reconneting...
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\357909043240713.rp l
All done, Disconnecting
Elapsed: 00:00:36
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok
Will Write CCC/HWC keys now...
RM-626.rpl not exist
Select file, please
- > No any file selected, break operation
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia E7-00
Software ver : V 79_sr1_11w42.5 25-11-11 RM-626 (c) Nokia
IMEI : 357909043240713
Ape Ver : 111.030.0609
APE Var : 111.030.0609111.030.0609.01.01111.030.0609.00.01
APE ADSP: 256
DSP Ver : 79_SR1_11w42.5
APE Test: 0.037
PPM :
CNT :
Product SN : CEN808312
Product code : 0591821
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 5040
Retu : 40
Tahvo : 00
Batery: 3751 mV
Camera:
CMT BT:
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 357909043240713
IMEI spNet : 3A 75 09 09 34 42 70 01
IMEI svNet : 33 75 09 09 34 42 70 31 F3
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created
SDD key status : Ok
SimLock status : Ok
Security status : Ok
PA_SL3 phone , SP_CODE_LEN : 15

[MobileLine]

Бекап RPL и PM на всякий случай,сотрите полностью и шейте 25-ю прошивку с ENO,проверьте включается или нет,если включится,залейте бекап RPL,Repair SDD и 1-309 блоки PM с SX4

[DB2020_Logs]

Да, верно. Используйте 25ю, не выше. Уж больно много гимора с новыми Belle и Anna