При включении ошибка nokia n900

[BlackIce]

При включении выдает ошибку "All telephony functions, including emergency calls, are disabled due to communication error. To recover, you might have to reboot the device"
Пытаюсь прошить mcu Best-ом ошибка

Skipped!!! Reason : empty initial data ( IF YOU FLASH eMMC ONLY - SKIP this!)
=== SW version Check ====


---Processing MCU image---

Processing NOL part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : xloader , 1.4.14.9+0m5
Processing : secondary , 1.4.14.9+0m5
NOL part Ok, boot flash done

Processing APE part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : kernel , 2.6.28-20103103+0m5
Kernel flash Ok

Processing APE part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : rootfs , RX-51_2009SE_21.2011.38-1_PR_MR0
RootFs flash Ok

Processing CMT part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : cmt-2nd , BB5_09.36
Processing : cmt-algo , BB5_09.36
Processing : cmt-mcusw , rx51_ICPR82_10w08
CMT part prepare Ok, files are sent
Program CMT request Ok

Switch : OSSO UART+USB
Version : RX-51_2009SE_21.2011.38-1_PR_MR0
Switch CMT request Ok
CMT : Erasing...
CMT : PROG_ERROR , Last data : error
CMT : Write not done!
CMT Part program error!