E66-2 rm-345 есть ли русский яз пакет

[Berick]

Принесли такой тел, а вот русского найти не смогу !


Добавлено позже.


Рискнул и прошил как rm-343.

Решение : прошить как rm-343, шить по юсб в режиме dead mode только файлы : mcu, ppm.

Вот лог

 JAF version 1.98.62
Detected PKEY: 9000********
Card life counter: 78.70%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.8.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for phone...Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
Found
MCU SW version: V 102.71.821
03-07-08
RM-345
(c) Nokia
HW version: 0720
PCI version: 
RFIC version: 
DSP version: 
APE SW Core version: 102.07.81
APE Variant version: 102.07.81102.07.81_v05
APE Test version: RM343ENO7411718213.017
Retu version: 15
Tahvo version: 22
APE HW version: 256
APE ADSP SW version: 256
APE BT version: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
Production serial number: SCO210318
Product code: 0564815
Module code: 
Basic production code: 0552886
Flash code: 
Order number: 
Product specific data: 
Long production SN: 0
ATO: 
Default SN type: 
IMEI plain: 352944020226026
IMEI spare to net: 3A 25 49 04 02 22 06 02 
IMEI SV to net: 33 25 49 04 02 22 06 12 F0 

LOCK STATUS:

CONFIG KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 

Loading INI list...
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\

Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
Phone Type: 
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\E66_rm-343_v110.07.126_mcu\^
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
Phone Type: 
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\E66_rm-343_v110.07.126_mcu\rm343_110.07.126_prd.c00
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
Phone Type: 
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\E66_rm-343_v110.07.126_mcu\rm343_110.07.126_prd.c00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\E66_rm-343_v110.07.126_mcu\rm343_110.07.126_prd.v05
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...102.71.821 102.07.81
Reading battery value...3931 mV
Init usb flashing...
Reading flashid... 
CMT: 004000EC <=> SAMSUNG (SEC) -> KAT00F00RA
APE: 00000000 <=> Flash -> not detected
Verifing ADL communication... Status byte 7
Rebooting to flash mode...
Waiting for the phone to reboot...
Searching for phone...
Error reading phone init data...
Changing mode...
Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
Done!
Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 006.044.048
    Elf2flash 07.11.000 test 3
    CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..............Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 0600
Selecting CMT flash...Result: 0000
Phone is in flash mode...
CMT blocks: 762, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\E66_rm-343_v110.07.126_mcu\rm343_110.07.126_prd.c00...
Erasing cmt zone 00040000 - 007FFFFF ... Erase result: 0000
Erasing cmt zone 00A00000 - 0759FFFF ... Erase result: 0000
Erasing cmt zone 0F1C0000 - 0F8BFFFF ... Erase result: 0000
Partition result: 0014
Partition result: 0014
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\E66_rm-343_v110.07.126_mcu\rm343_110.07.126_prd.v05...
Erasing cmt zone 05420000 - 0759FFFF ... Erase result: 0000
Partition result: 0014
Send CMT CFG...

Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\E66_rm-343_v110.07.126_mcu\rm343_110.07.126_prd.c00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... 
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS*CORE
Sending CMT HASH for SOS+ROFS
Processing C:\Program Files\Nokia\Phoenix\Products\E66_rm-343_v110.07.126_mcu\rm343_110.07.126_prd.v05...
Sending CMT HASH for SOS+ROFX
Write result 27: 1701
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V 110.71.831
29-08-08
RM-345  Интересно вот тут все еще показывает RM-345
(c) Nokia
APESW: 110.07.126
VariantSW: 110.07.126
Prodcode: 0564815
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 8 seconds...
Done!
Done!
Changing mode...
Detected P-KEY: 9000********
P-key nokia module version 01.02
Init usb communication...
Done!

Щас тел отлично работает и хозяин доволен.

P.S Подумал может кому-то пригодится. Сначала дажь забыл бекапы сделать, но всё равно кабель фбс-а нету у мя...!

[bumbox71]

а не проверил 3G работает после прошивки?

[Berick]

Сообщение от bumbox71

3G работает после прошивки?

Работает без проблем!