[da-daemon]

Собственно в названии темы все сказано, навсякий случай лог :

================================================== ====
MARTECH Siem Serv. Tools 14.4 Info File
================================================== ====
DEVICE TYPE : BOX II / BOX II PLUS
BOX SERIAL NUMBER : 9E D5 A4 49 A0 95 D7 F2
REGISTRATION STRING : ****************************
-----------------------------------
Selected COM Speed : 921600 kbd
Selected Phone Type : A55, A56, C55, 2128
Selected kind of Service Mode : Testpoint Adapter v2.0 / v3.0
Use slow Unlock/Repair method : NOT SELECTED
Don't check Ph.Type (for Repair) : NOT SELECTED
Auto Show Test-Point Info : SELECTED
-----------------------------------
SETTINGS_01 : SELECTED
SETTINGS_02 : SELECTED
SETTINGS_03 : NOT SELECTED
SETTINGS_04 : SELECTED
SETTINGS_05 : SELECTED
SETTINGS_06 : NOT SELECTED
SETTINGS_07 : SELECTED
SETTINGS_08 : SELECTED
-----------------------------------
Phone Type: None
SW Version: None
Flash Type (SW): None / None / None
Flash Type (HW): None / None / None
Phone ID: None
LANG / T9: None / None

MESSAGE BOX:
__________________________________________________ ____

ERROR (07.01)
Adapter: [NO_RESPONSE]

1) are you sure you have TESTPOINT ADAPTER v2.0/3.0 ?
2) if yes, disconnect adapter from box, and connect again.

__________________________________________________ ____

Шлейф подключения адаптера к боксу вызванивался и менялся. Обнаружение неисправности и ремонт в местных условиях возможен? Заранее спасибо.