GSM Форум - GSMForum.SU - Показать сообщение отдельно - Успешное применение, без комментариев [InfinityBox CM2 SPD]

Тема: Успешное применение, без комментариев [InfinityBox CM2 SPD]

Показать сообщение отдельно

19.06.2020, 16:39	#3
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,954 раз за 1,595 сообщений Репа: 1190	maxvi ms401 прошивка firmware Operation : Read FullFlash & Convert InfinitySC to SPRD PAC Operation : Read FullFlash [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 14 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 14 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 14 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : Maxvi_MS401 Model Brand : Maxvi Model Device: Maxvi_MS401 AndrVersion : 7.0 BaseBand CPU: SP7731CEA Project Ver : Maxvi_401_V04_20180428 Model Ext : Maxvi_MS401 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x800.bin [Read Ok] : fblogo_480x854.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : trustos.bin [Read Ok] : vmm.bin [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 2925 MiB Saved to : C:\Users\irchi10\Desktop\SP7731CEA_Maxvi_MS401_7.0 _Maxvi_401_V04_20180428_Maxvi_MS401\ Done! Elapsed: 00:15:54 Reconnect Power/Cable! Finish at : [19.06.2020 / 15:47:16] Start at : [19.06.2020 / 15:47:39] Operation : Convert InfinitySC to SPRD PAC [ v1.27 ] Target : SP7731CEA_Maxvi_MS401_7.0_Maxvi_401_V04_20180428_M axvi_MS401 Step #1 : Identify MEMORY : eMMC LAYOUT : eMMC NORMAL Step #2 : Select logic Select Logic : SC7731 Step #3 : Processing data Build PAC [ADD FILE] : nvitem_w.bin [ADD FILE] : nvitem_wcn.bin [ADD FILE] : prodnv.img [ADD FILE] : u-boot-spl-16k.bin [ADD FILE] : sc7731C_CP0_modem.bin [ADD FILE] : DSP_DM_Gx.bin [ADD FILE] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin [ADD FILE] : logo_480x800.bin [ADD FILE] : fblogo_480x854.bin [ADD FILE] : boot.img [ADD FILE] : system.img [ADD FILE] : sysinfo.img [ADD FILE] : cache.img [ADD FILE] : recovery.img [ADD FILE] : userdata.img [ADD FILE] : u-boot.bin Build Ok! Result : 0x0018 Sign PAC ... Sign Ok! FW compiled! Elapsed: 00:00:39 Saved to : SP7731CEA_Maxvi_MS401_7.0_Maxvi_401_V04_20180428_M axvi_MS401.pac Done! Миниатюры __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur