[TIGRa_MHC]

M-PPG700 PhonePad
preloader_yecon77_twn_tb_jb

Operation.log

Card found : S/N : iTigra , v0130
Chinese Miracle II [MTK module] v 1.51

Start at : [04.09.2016 / 10:18:06]
Operation : Check / Read Info [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , G80CM
[eMMC] : FLASH_CID : FE014E4D4D43303847344970392B7FCD
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D5000000
[eMMC] : FLASH_UCP : 7504 MiB [eMMC 8 GiB]
DEV RID : 0xB92E1B69825D9DD12323FCAA4D3968D8
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : MTK/8377
ProdName : PhonePad
ProdModel : M-PPG700
Device : PhonePad
AndroidVer: 4.1.2
MTKxCPU : MT6577
MTKxPRJ : ALPS.JB.MP.V1.15

SECURITY :
IMEI_SW [1] : 615E4F1D8EA6240
IMEI_SW [2] : 615E4F1D8EA6240
BTMAC Addr : 000000000000
WiFi MAC : 000000000000

MODEM :
BaseBand : MT6577_S00_MAUI_11AMD_W12_22_SP_V9

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Finish at : [04.09.2016 / 10:18:19]

Start at : [04.09.2016 / 10:18:33]
Operation : Read Flash [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , G80CM
[eMMC] : FLASH_CID : FE014E4D4D43303847344970392B7FCD
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D5000000
[eMMC] : FLASH_UCP : 7504 MiB [eMMC 8 GiB]
DEV RID : 0xB92E1B69825D9DD12323FCAA4D3968D8
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : MTK/8377
ProdName : PhonePad
ProdModel : M-PPG700
Device : PhonePad
AndroidVer: 4.1.2
MTKxCPU : MT6577
MTKxPRJ : ALPS.JB.MP.V1.15

[Read Ok] : preloader_yecon77_twn_tb_jb.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6577 / V1.0.0 / yecon77_twn_tb_jb / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 879 MiB
Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6577__MTK8377 __M-PPG700__PhonePad__4.1.2__ALPS.JB.MP.V1.15\

All done!

Done!
Elapsed: 00:07:15
Reconnect Power/Cable!

Finish at : [04.09.2016 / 10:25:49]

MT6577__MTK8377__M-PPG700__PhonePad__4.1.2__ALPS.JB.MP.V1.15
MT6577_S00_MAUI_11AMD_W12_22_SP_V9_eMMC_8601570203 77831.spnv