Что то не так. не пойму
Код:
Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : ZTE
Device Manufact.: ZTE
Device Model : ZTE-V811
Device CPU : MSM8610
Device IntName : ZTE-V811
Device Version : 4.4.2
CU_SWVer : ZTE
Device Compile : 11.09.2014 7:09:42
Device ExtInfo : Beeline Smart2
Load Ok!
Operation : Flash [ v1.10 ]
ForceFlashing : Enabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 00A3906A
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 7F89E31BBA202D58077C94F9461D95B5
ID_BLOCK_L : 7E15BB12078E30B548A7E82123C2DCFF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!
Files in Chain : 19
Flashing now
Flashing : gpt_main0.bin
ProgStart : start 0, num 34
ProgFinish : Read back verify failed at sector -708270700,num sectors 0
Flash Error , Wrong ACK message! Bad File or eMMC fault?
Error : Flashing failed!
Check previous message for more info!
Reconnect Power/Cable!
------------------------------------------------
Добавлено позже:
Прошивка с трупа сливается спокойно
Код:
Operation : Read Flash [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 00A3906A
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 7F89E31BBA202D58077C94F9461D95B5
ID_BLOCK_L : 7E15BB12078E30B548A7E82123C2DCFF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!
DevInfo : MSM89xx
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : fs_gc.img
[Read Ok] : splash.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1007 MiB
Done!
Elapsed: 00:04:00
Reconnect Power/Cable!