[Spiridv]

Апну темку. Пришел уваленный X (RM-1013) со слов клиента пытался прошить Nokia X Flasher. Я почему-то (сам не пойму почему) скачал версию 2.1.0.13, флешер подхватил телефон и начал шить, но остановился

флеширование

Connect phone on selected interface...

Core : v2.13 , NXP FlashEngine : v5.0

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.13_059V782_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.13_user_prog_emmc_firehose_8x10.mbn


Dead Mode is Selected
1. Phone should be Off!
2. Press and hold 'Volume Down' button
3. Insert USB cable and hold button, until phone will be detected


Handshake Ok
Init[0] : 0x01000000
Init[1] : 0x30000000
Sending Loader ...
Init Loader ...
FireHose Initialized
Device Init Ok
Target VER : 1
Target CPU : 8x10
Target FLN : eMMC
Target CNF : 1000/C000/1000
Target DBG : logbuf@0xF8021118 fh@0xF801DF80

Files in Chain : 67
Flashing now

Flashing : rm1013_2.1.0.13_user_NON-HLOS.bin
ProgInit : start 16384, num 75203
ProgDone : Finished sector address 91587
Flash Ok
Flashing : rm1013_2.1.0.13_user_sbl1.mbn
ProgInit : start 147456, num 492
ProgDone : Finished sector address 147948
Flash Ok
Flashing : rm1013_2.1.0.13_user_sbl1.mbn
ProgInit : start 148480, num 492
ProgDone : Finished sector address 148972
Flash Ok
Flashing : rm1013_2.1.0.13_user_sdi.mbn
ProgInit : start 149504, num 45
ProgDone : Finished sector address 149549
Flash Ok
Flashing : rm1013_2.1.0.13_user_emmc_appsboot.mbn
ProgInit : start 180224, num 938
ProgDone : Finished sector address 181162
Flash Ok
Flashing : rm1013_2.1.0.13_user_emmc_appsboot.mbn
ProgInit : start 181248, num 938
ProgDone : Finished sector address 182186
Flash Ok
Flashing : rm1013_2.1.0.13_user_rpm.mbn
ProgInit : start 182272, num 296
ProgDone : Finished sector address 182568
Flash Ok
Flashing : rm1013_2.1.0.13_user_rpm.mbn
ProgInit : start 183272, num 296
ProgDone : Finished sector address 183568
Flash Ok
Flashing : rm1013_2.1.0.13_user_boot.img
ProgInit : start 196608, num 14549
ProgDone : Finished sector address 211157
Flash Ok
Flashing : rm1013_2.1.0.13_user_tz.mbn
ProgInit : start 229376, num 663
ProgDone : Finished sector address 230039
Flash Ok
Flashing : rm1013_2.1.0.13_user_tz.mbn
ProgInit : start 230376, num 663
ProgDone : Finished sector address 231039
Flash Ok
Flashing : rm1013_2.1.0.13_user_system_1.img
ProgInit : start 344064, num 262160
ProgDone : Finished sector address 606224
Flash Ok
Flashing : rm1013_2.1.0.13_user_system_2.img
ProgInit : start 606600, num 16
ProgDone : Read back verify failed at sector -1433498461,num sectors 606600
Flash Error , Wrong ACK message! Bad File or eMMC fault?

Chain finished, All files flashed!

Rebooting phone now

Flashing done!
Total flash time : 00:00:51

Я подумал что Bad File и решил по новой скачать прошивку, уже по продукт коду, версия оказалась 2.1.0.12

Но теперь совсем перестал шиться

Всё пипец

Connect phone on selected interface...

Core : v2.13 , NXP FlashEngine : v5.0

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.12_059V780_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.12_user_prog_emmc_firehose_8x10.mbn


Dead Mode is Selected
1. Phone should be Off!
2. Press and hold 'Volume Down' button
3. Insert USB cable and hold button, until phone will be detected


Handshake Ok
Init[0] : 0x01000000
Init[1] : 0x30000000
Sending Loader ...
Init Loader ...
FireHose Initialized
Device Init Ok
Target VER : 1
Target CPU : 8x10
Target FLN : eMMC
Target CNF : 1000/C000/1000
Target DBG : logbuf@0xF8021118 fh@0xF801DF80

Files in Chain : 67
Flashing now

Flashing : rm1013_2.1.0.12_user_NON-HLOS.bin

и висит здесь