Пришел телефон с висяком на заставке, пытаюсь прошить бестом. Процесс останавливается на EXBL Status : Alive [ USB Load Active ]
Код:
Core : v1.92 , MTKx FlashEngine : v4.2
Verify files ...
MAUI : RM-969_ROM_eMP_10.03.11
VIVA : RM-969_VIVA_eMP_10.03.11
LANG : RM-969_LANG_PACK_ROM_EI_eMP_10.03.11
CUST : RM-969_CUSTPACK_ROM_EI_EURO_RU_eMP_10.03.11
JMPT : RM-969_JUMP_TABLE_EI_EURO_RU_eMP_10.03.11
- > MODE : FullFlash
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 261 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : B49F2C82F04AA500CB18B5B2E9EAF886
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL failed! (CMD not accepted, 0xAA)
Check Power / Cable!
BootLoader Init Failed (HW/Connection Error)
Connect phone on selected interface...
Boot Error
Flashing failed!
Connect phone on selected interface...