[rmihaild]

VolcanoBox V1.7.9 Can make any Samsung & LG UART cables even C3303K,S7070 etc.
Whats new ?
Now you can use Your Volcano box as any UART & Ignition CABLE !!
what does it's means ?

it's mean now you can use your Volcanobox as any UART Cable or any Ignition cable for Samsung , LG etc. Cables which use Resistance to short any pin to GND. let me give you example. Samsung C3303K Uart cable. this cable have 1- VCC, 2- RX, 3- TX, 4 short with 510K Resistor with pin number 5, 5- GND. as you see this cable Short 2 pins each other. this cable Short pin 5 and pin 4 with 510 K resistance,

This is Schismatics of Samsung C3303K working cable

Fig. 01

as you can see in Fig. 01 schismatics of Samsung C3303K cable it's shot 2 pins with 510K resistor like this any cable of any BRAND which use resistance between any two pins like short GND with pin number 4 with 100K resistance or Short VCC with pin number 3 with 560K or any thing like this you can use your Volcanobox.... and No need to buy many cables....

How can i use this ?

Connect your desire phone to volcanobox
Make sure you connect your phone with correct way
Open volcanobox
Go to Detect tab
Drag and Drop your desire pinout funtion to Desire pins
for example you want to set Samsung C3303K cable for this you have to set like this
Drag and Drop Vcc to pin number 1
Drag and Drop Rx to pin number 2
Drag and Drop Tx to pin number 3
Drag and Drop REA to pin number 4
Drag and Drop GND to pin number 5
Drag and Drop REB to pin number 5
Set Resistance Value 510K
Click on set pinout