[Решено]Nokia 5800 Boot not Found
Данный аппарат постирали хорошо в машинке, был разобран через несколько часов, так что окислиться еще не успел.Спиртом вымыт и высушен.Первая проверка, телефон признаков жизни не подает и на программатор не отвечает.Заменил Avilma и Betty после этого программаторы стали отвечать только Check
UFS
Код:
1ST BOOT : C0,07 [Rm-356] [2.1.0.1]
RAPx ID : 000000010000022600010006400C192101051103
EM 1 ID : 00000296
EM 2 ID : 00000B21
RAPx PBID : 1020011337A6005246D0A0C57AF87D810F273017
RAPx MODE : 00
RAPx HASH : 479C6DDE3942E12C429C1D6ADED80371
RAPx ROID : 4B9B75103E691FF8
CMT 1ST Boot OK
Boot not Found: ASIC not Supported
CMT 2ND Bt: ASIC not Supported
BAD BOOT
ERR: CMT 2ND Boot
Rebooting Mobile
Cyclone
Код:
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B21
CMT_PUBLIC_ID: 1020011337A6005246D0A0C57AF87D810F273017
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.34.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.34.1, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Failed to read info -> Phone not detected
JAF
Код:
CMT Boot Data:
Asic ID: 000000010000022600010006400C192101051103
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 1020011337A6005246D0A0C57AF87D810F273017
HASH: 479C6DDE3942E12C429C1D6ADED8037100000000
ROM ID: 4B9B75103E691FF8
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\RAPIDOv11_2nd.fg
Loader version: 09.30.00 -> Revision: 0200
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 00400020 <=> ST -> Type not in database
CMT Flash Data: NOT AVAILABLE
C:\Program Files\ODEON\JAF\Flash\RAPIDOv11_XSR15_alg.fg...
......................Sending CMT HASH for PASUBTOC
.........................Sending CMT HASH for ALG
.............Done!
CMT Loader Ready
Done!
Restarting phone...Done!
Перекатал проц и память, под ними было чисто но результат остался тот же. Подскажите где копать дальше? |
