GSM Форум - GSMForum.SU

GSM Форум - GSMForum.SU (https://gsmforum.su/index.php)
-   Китайские телефоны - программный ремонт (https://gsmforum.su/forumdisplay.php?f=185)
-   -   FN5258 не включается. (https://gsmforum.su/showthread.php?t=55408)

darkzerro 25.11.2009 07:44

FN5258 не включается.
 
Принесли телефон на русский. Хинтелом был слит фулл, после зарусен. После чего захотели снова востановить первоначальное ПО:

Хинтел не захотел шить:
----------------
Код HTML:

open comport:COM6
  please turnon your phone ,until connect success(press F4 Abort).
  connect to Phone.
  CPU model :6223  ( HW_VER: 8A05 )
  download Boot ...
  boot File Ver.:04.02
  flash manuf. maybe :SAMSUNG
  NOR flash model :
  NOR flash size:01000000 (16.0M)
  NOR flash ID code :00EC2402 (00000000) *****91;164*****93;
  Int.RAM size:0000A000 (0.40M)
  Ext.RAM size:00400000 (4.0M)
  Bootloader in *****91;NOR*****93; flash
  Read flash information operation done!
  baud set:460800
  analyze flash ...(algorithmic*****91;A*****93;)
  decryption fail1 D74
  analyze flash ...(algorithmic*****91;B*****93;)
  this File not decrypt data ...
  analyze flash ...(algorithmic*****91;C*****93;)
  not found address bit. 1
  analyze flash ...(algorithmic*****91;D*****93;)
  decrypt flash fail.07
  decryptfail,write origin flash files ,
  flash size:01000000 (16.0M)
  write flash...
  Write Error ! :00000000
>>operation done.

FlashTool 03.9.32 - прошил, но телефон перестал включаться.

Infinity log repair:
==== log: [24.11.2009 19:40:35] ====
Код HTML:

COM6 *****91;ProlificSerial0*****93; selected
module  v3.00
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: repair "bad software" (mode-1)
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing *****91;6223:8A05:8A00*****93;...
CPU: MT6223
high speed boot On
chip: 0011:8372:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
detecting chip #01 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
detecting chip #02 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
detecting chip #03 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
====>  Set baud ...
115200
Set baud Done
====>  Initialize bootcode ...
Initialize bootcode Done
====>  Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
detecting chip #01 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
searching rom info...
search rom info finished
rom info structure: 2nd *****91;enhanced*****93; generation
TCL-ID is absent
startup code area #1 is damaged, recalculation required
rom info detection finished
device-id: 3CCEE8F3
rom info protocol ver: 04
ver. sw 1: MX701A_HYF_NTP_128_PCB01_GPRS_MT6223P_S00.V1_00_02_M090703CN0-V22.BIN
ver. sw 2: V1.00.02_M090703CN0-V22, CB497890
address offset: 00000000
ffs offset/size: 00B60000/004A0000
detecting licence parameter...
detecting licence parameter name...
phase #1...
................................................................
phase #2...
................................................................
done
error: licence parameter licence parameter name is not found
What to do:
1. Be sure that your phone really has "bad software" problem, in other case do NOT use "bad software" button !
2. Repeat "bad software" operation several times to avoid communication problems.
3. Flash phone with firmware from support area and repeat "bad software" operation.
If still no luck:
1. read full flash and send to support: *****91;email*****93;mt62xx@gmail.com*****91;/email*****93;
2. send "operation.log" file to support: *****91;email*****93;mt62xx@gmail.com*****91;/email*****93;

file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\_system_log_3CCEE8F3_907849CB_20091124-194204.B0X.bin
Finished, time used: 70 sec
Remove/Install battery now !



У кого есть такой фулл или телефон. Дайте фулл слитый FlashToolом или Infinity. Надо бы поднять тело.
Фулл слитый Хинтелом прикладываю, может его кому получится поправить для востановления.

MX701A_HYF_NTP_128_PCB01_GPRS_MT6223P_S00.V1_00_02 _M090703CN0-V22.rar
http://www.rapidshare.ru/1266577

taa73 25.11.2009 08:51

Цитата:

У кого есть такой фулл или телефон. Дайте фулл слитый FlashToolом или Infinity. Надо бы поднять тело.
Фулл слитый Хинтелом прикладываю, может его кому получится поправить для востановления.
Фулл скачать пока не получается попробуй этим пролить....

http://www.gsmforum.su/showpost.php?...&postcount=102 v 2.61...


Текущее время: 05:35. Часовой пояс GMT +3.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd. Перевод: zCarot