K810 no ack during gdfs_readvar
 

Телефон убит програмно 100%.
Делаю ему testpoint.

CFG:000000000000000
TESTPOINT REPAIR STAGE #1 STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:0 CID:15 PAF:1 IMEI:04857555************ CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
DONE
TESTPOINT REPAIR STAGE #2 STARTED
ATTACH TP #2 AND PRESS "READY"
Starting embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
WRITING EROM...
DONE
Elapsed: 53 secs.

CFG:000000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:0 CID:15 PAF:1 IMEI:04857555************ CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
Flash ID check:897E
Flash props sent ok
writing "C:\setool2g\gdfs_in_ssw_format\db2020\K810_GDFS_S SW.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 640
Will flash 32 blocks...
SSW loading returns:0
Setting up GDFS...
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "88584666"
SIGNING...
Elapsed: 45 secs.

CFG:000000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:0 CID:15 PAF:1 IMEI:04857555048575 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
Flash ID check:897E
Flash props sent ok
writing "C:\setool2g\eroms\db2020\DB2020EROM_CNV_RED52_BRO WN_CID49_DB2020.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 40
Will flash 2 blocks...
SSW loading returns:0
Setting up GDFS...
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "12583636"
SIGNING...
Elapsed: 14 secs.

Делаем Identify и получаем .....

CFG:000000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP: LOCKED:0 CID:15 PAF:1 IMEI:04857555************ CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
SCRC READ FAILURE
Elapsed: 4 secs.

Подскажите где грабли? Что я неправильно делаю?

Делать процедуру empty fill

Пока MF не работает, выкладываю...
манульчик от Лазера, за что ему большое спасибо