GSM Форум - GSMForum.SU - w880 при включении горит красный светодиод

Всем доброго времени суток!!!
Принесли тело, прошил сетулом
думаю что надо тест поинт делать, а есть решения без него, тел на гарантии разбирать не хочется, за ранее благодарен.
вот лог:

Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:230400
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35159602931099 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 14 secs.

THAT ACTION IS ILLEGAL,IF YOU DOING IT
FOR ANY PURPOSE, OTHER THAN REPAIR PHONE

Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:230400
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35159602931099 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 14 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:230400
Can't load ID loader !
Elapsed: 7 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:230400
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35159602931099 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 3 secs.
SIGNED MODE (USING SERVER)
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:230400
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35159602931099 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing "D:\SE-TOOL\w880\R6BC002_1250640_GENERIC_AI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing "D:\SE-TOOL\w880\R6BC002_FS_RUSSIA_AI_RED_CID52.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:2500
Will flash 125 blocks...
SSW loading returns:0
writing "D:\SE-TOOL\w880\R3B021_cxc1250592_FOTA_UA_MARIKA_CID52_R ED.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:80
Will flash 4 blocks...
SSW loading returns:0
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
GDFS startup failed (1D)
loader GDFS startup failed, that is fatal
Elapsed: 1914 secs.