|
HWK Release 21/03/2008 (v2.0.7)
Release Date: 21/03/2008
The Official release is ready in our download area http://sarunasoftware.com. Please follow the instructions careful on the above page. The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:- Programs\SarasSoft\UFS\Utilities\Update Client WARNING !!! If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk. NOTE: Support Access is via the software modules only, download managers have been disabled. UFS_DCTxBB5 v2.0.7 -------------------- 1. New BB5 products: RM-179,RM-223,RM-233,RM-244,RM-256,RM-264,RM-269,RM-278,RM-279, RM-313,RM-314,RM-320,RM-321,RM-322,RM-323,RM-397,RM-421,RM-426 (N81-1,N81-3,8800e-1,E51-1,N81-5,7900d-1,N81-6,6500s-5,5610d-5,N82-1, N82-2,N95-2 8G,N95-6 8G,6301,6301b,6500c-5,N95-4,E51-2) 2. ISM flashing support for BB5 products. 3. Improved DCT4/WD2 Flash Loaders version display. 4. Fixed BB5 PM file open bug. 5. Improved Extended PHONET messages handling. 6. Store of Ext.VPP setting in INI file. 7. Support of new Flash Chips. 8. Fixed CNT flashing for 7370 and 6151. 9. Flash Update pack (7.46.43.30662) added. Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. This has always been the case with 7 pin cables, but from this release 7 pin cables are supported by UFS+HWK. UFS_LG_GSM v2.0.7 ------------------- 1. KG280, KP200, KP202, MG280 support added. UFS_SAMs v2.0.7 ----------------- TRIDENT C170,C178,C188,E210,E218,E840B,E848,E870,E878,E888 ,E958, F210,F218,P520(Armani),M608,T519,T629,U600B,U608B added. OM(SYSOL) C160,C160B,C160L,C160M,C166,C168,C180,C450,C458,CC 03, M110,X540,X550 added. E2P unlock fixed for E420,E428... Implemented MSL calculation, allows direct unlock without E2P corruption and shows correct codes. Rebuild of corrupted Master Key during wrong unlock. IMEI rebuild for new models (Sysol3) SWIFT D880,D888(Duos),E746,G608,L600,L608,M610,M618 added. Implemented MSL calculation, allows direct unlock, and show correct codes, without any data lose or setting to default values of MSL, BTID, IMEI or Radio settings. E2P Sections Read/Write introduced (compatible with TAT) IMEI and BTID rebuild.(Imei option for Swift_1 only now) Fixed bug of 0 length TFS files flashing (affected: java appletts in D880, E200, E250, G600, M610 products) COMMON INFO E2P(hee)sections R/W allows to transfer calibration data, radio setttings, etc. from product to product, without damage to other vital data, unlike E2P or FULL clone. Or allows to Read-Edit-Write well known values. Warning, Access to some sections can be denied by firmware, or can have different values dependand on firmware version. In case of protected or none existing section will have result length of 0 or lose of TAT mode. SeDBx v 2.0.7.0 --------- 1. API Updated. Many thanks to all those who have supported us!!! |
|
|
опять 2 файла? "подготовочный" и сама сьюита?..
|
Цитата:
|
Будьте добры разбейте и выложите на форум... людям с неисправным инетом было бы удобнее качать.. заранее спасибо
|
или сервак перегружен или чтото не так)
Locating HWK Upgrade server... HWK Upgrade server found! Preparing connection to server... Connecting to HWKUpgrade server... Server connection successfully established. Authenticating on server... Authentication stage error: Connection Closed Gracefully. |
Поиск сервера обновлений HWK...
Поиск сервера обновлений HWK завершен. Подготовка подключения к серверу... Подключение к серверу... Канал обмена данными с сервером открыт. Авторизация на сервере... Ошибка аутентификации: Connection Closed Gracefully. |
ждать ам надо по ходу,пока вся толпа не обновится))
|
Вложений: 8
Muver Держи разбитый сюит 2.07
|
HWK suit instal not authorised
Вложений: 2
лежит сервак и снова ждать ?Или другая причина?
|
При чем тут сервак, у тебя ведь обновился он нормально. Ты HWK_Support_Suite_Setup_v02.07.000 установил?
|
HWK suit instal not authorised
Цитата:
|
Цитата:
2. Ставь HWK_Support_Suite_Setup_v02.07.000 (4.4mb) 3. Обновляй HWK 4. Ставь саму сюиту HWK_Suite_Setup_v02.07.00 (54mb) и все! |
Поставил новую Винду.
Установил HWK_Support_Suite_Setup_v02.07.000. При обновлении пишет, что уже обновлен. При установке HWK_Suite_Setup_v02.07.00 выдает то-же самое сообщение и не устанавливается. |
Блин у меня тоже не получается.Ставлю HWK_Support_Suite_Setup_v02.07.000. и он мне пишет Please Remove HWK Setup Suite prior to installing/removing HWK Support Suite.
ЧТо делать? |
Проблема с обновлением
а когда 6 версию обновляю вот что пишет:
Upgrade log: ---------- HWK Update Client v 2.0.6.0 ---------- ---------- HWK upgrade started:14:39:59 ---------- -- Target Id : 62 CF 1 10 -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003. -- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007. -- UFSx S/N : ------- -- Features : 00000001 -- Licence 5 : True -- UFSx Vendor: TORNADO -- HWK ID : -- HWK Status : ---------- Locating HWK Upgrade server... HWK Upgrade server found! Preparing connection to server... Error preparing connection to server! Please check your internet connection and try again. Cannot get valid data from server! Please check your internet connection and try again! |
Вложений: 1
А у меня вот такая проблема.
|
Цитата:
Надо обновлять на том компе где будет использоваться програматор. |
Цитата:
http://www.gsmforum.su/showpost.php?...9&postcount=14 |
| Текущее время: 22:58. Часовой пояс GMT +3. |
Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd. Перевод: zCarot