GSM Форум - GSMForum.SU
Страница 3 из 5 12 3 45
Показывать 20 сообщений этой темы на одной странице

GSM Форум - GSMForum.SU (https://gsmforum.su/index.php)
-   Infinity Box (https://gsmforum.su/forumdisplay.php?f=58)
-   -   Успешное применение, без комментариев [InfinityBox CM2 SPD] (https://gsmforum.su/showthread.php?t=108132)

yurii-62 06.10.2016 17:56
Вложений: 1
SPD6531 BQ-1403- Capri rus

Код:
Chinese Miracle II  [SPD module] v 1.22

Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : BQ
Model Name  : 1403 Capri
ExtInfo Data : rus
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_rus__BQ-1403 Capri_2.bin
Done!
Full cчитан, и записан в другой аппарат все ОК.

SPD6531_00400000_GD25LQ32_rus__BQ-1403 Capri_2.bin

gulka 12.10.2016 11:45
Вложений: 2
ZTE Blade AF5 Прошивка Pac

Operation : Read FullFlash [ v1.22 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : P731A20
Model Brand : ZTE
Model Device: P731A20
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : ZTE_Blade_AF5V1.0.0B03
Model Ext  : ZTE T230

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.29.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1235 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230\
Done!

Elapsed: 00:05:01

Reconnect Power/Cable!
Operation : Convert InfinitySC to SPRD PAC [ v1.22 ]

Код:
Target : SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.29.4_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:02:29

Saved to : SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230.pac
Done!

uploads 28.10.2016 21:05
Вложений: 2
Explay SL260
Цитата:
Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C2 0025 0038 0000
[0] Flash VEN : Macronix , MX25
[0] Flash CAP : 01000000
Read Flash Content
Read Ok , collect info
Platform : MOCOR_12C.W13.04.05_Release
Project : SC6531_OPENPHONE
HWInfo : SC6531_OPENPHONE
Compile : 03-31-2014 17:34:17
Set FileInfo :
Model Vendor : Explay SL260
Model Name : Explay SL260
ExtInfo Data : ru.ua
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_01000000_MO COR_12C.W13.04.05_Release_03312014173417_ru.ua__Ex play SL260-Explay SL260.bin
Done!

Elapsed: 00:02:42

Reconnect Power/Cable!

nodir0077 10.11.2016 23:41
MTC SMART Start 3 ZTE BLADE L110 , SP Unlock [ v1.22 ]

Цитата:
Reading extended info ...

Model Name : SMART_Start_3
Model Brand : ZTE
Model Device: ZTE_BLADE_L110
AndrVersion : 5.1
BaseBand CPU: SP7731GEA
CompileDate : 27.05.2016 8:50:47
Project Ver : MTS_RUSSIA_MTC_SMART_Start_3_V1.0.2
Model Ext : SMART Start 3
Цитата:
Operation : SP Unlock [ v1.22 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 18 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:01:44

gulka 17.11.2016 17:43
Вложений: 1
BQ-7010G MAX SC5735C Прошивка

Operation : Read FullFlash [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : BQ-7010G
Model Brand : BQ
Model Device: BQ-7010G
AndrVersion : 4.4.2
BaseBand CPU: BQ-7010G
Project Ver : BQ-7010G MAX-V1.0
Model Ext  : BQ-7010G

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo.bin
[Read Ok] : fblogo_800x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 844 MiB
Saved to : C:\Users\TIMUR\Desktop\BQ-7010G_BQ-7010G_4.4.2_BQ-7010G_MAX-V1.0_BQ-7010G\
Done!

Elapsed: 00:06:05

Reconnect Power/Cable!

gulka 18.11.2016 10:52
Вложений: 2
DIGMA Linx A400 3G SC7731C Прошивка

Код:
SLDR Load Ok
BB CPU  : SC7731C
SC773c Rev5

For disable SLDR - select PAC or other SLDR or re-select CPU in settings tab!

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Linx_A400_3G
Model Brand : DIGMA
Model Device: LT4001PG
AndrVersion : 5.1
BaseBand CPU: SP7731CEB
Project Ver : GST_A10C_M10_K408CA_MF_V05_20160612
Model Ext  : Linx A400 3G LT4001PG

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1203 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG\
Done!

Elapsed: 00:08:32

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.24 ]

Target : SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0019
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:04:26

Saved to : SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG.pac
Done!

gulka 18.11.2016 12:48
Вложений: 2
Digma Plane 7004 3G Прошивка

Operation : Read FullFlash [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geaplus_k03_cfgj_digma_64_8_dt
Model Brand : DIGMA
Model Device: scx35_sp7731gea_k03_cfgj_digma_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_CFGJ_DIGMA_64_8
Project Ver : LMY47D release-keys
Model Ext  : Plane 7004 3G PS7032PG

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1336 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_K03_CFGJ_DIGMA_64_8_scx35_sp7731gea_k03_cfgj_digma_64_8_5.1_LMY47D_release-keys_Plane_7004_3G_PS7032PG_1218112016\
Done!

Elapsed: 00:03:50

Reconnect Power/Cable!

gulka 23.11.2016 12:49
Fly FS509 Nimbus 9 SC7731C ПРОШИВКА

Код:
Chinese Miracle II  [SPD module] v 1.24

SLDR Load Ok
BB CPU  : SC7731C
SC773c Rev5

For disable SLDR - select PAC or other SLDR or re-select CPU in settings tab!

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : FS509
Model Brand : Fly
Model Device: Nimbus_9
AndrVersion : 6.0
BaseBand CPU: FLY
Project Ver : SW08_FLY_FS509_2016_09_22
Model Ext  : FS509

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W16.12.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2424 MiB
Saved to : C:\Users\Public\Desktop\*****192;*****234;*****242;*****232;*****226;*****224;*****242;*****238;*****240;\FLY_Nimbus_9_6.0_SW08_FLY_FS509_2016_09_22_FS509\
Done!

Elapsed: 00:16:16

Reconnect Power/Cable!

gulka 25.11.2016 14:26
DIGMA Optima 8002 3G TT8001PG Прошивка и NVram

Operation : Read FullFlash [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : k03_jlc_8inch_64_8_dt
Model Brand : DIGMA
Model Device: k03_jlc_8inch_64_8
AndrVersion : 5.1
BaseBand CPU: K03_JLC_8INCH_64_8
Project Ver : UNKNOWN release-keys
Model Ext  : Optima 8002 3G TT8001PG

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_800x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1336 MiB
Saved to : C:\Users\TIMUR\Desktop\K03_JLC_8INCH_64_8_k03_jlc_8inch_64_8_5.1_UNKNOWN_release-keys_Optima_8002_3G_TT8001PG\
Done!

Elapsed: 00:04:51

Reconnect Power/Cable!

Operation : Read NV [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x00029670
Saved to : C:\Users\TIMUR\Desktop\Optima 8002 3G\CX_SPDNV.spdnv

Elapsed: 00:01:15

Reconnect Power/Cable!

gulka 02.12.2016 14:08
Вложений: 1
Встретил FLY FS454 Nimbus 8 на SPD, везде он MTK:confused:;)

Прочесть граф.ключ не смог , снес форматом
Operation : Read PatternLock [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

FlashMode Set : Ok!
Reading PatternLock ...
PatternLock Not Set!

Elapsed: 00:00:19

Reconnect Power/Cable!
Operation : Check/Read Info [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name  : FS454
Model Brand : Fly
Model Device: Nimbus_8
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
CompileDate : 26.09.2016 6:35:43
Project Ver : SW05_FLY_FS454_2016_09_26
Model Ext  : FS454

ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!!

Elapsed: 00:00:22

Reconnect Power/Cable!
FLY FS454 Nimbus 8 Прошивка для SPD

Operation : Read FullFlash [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : FS454
Model Brand : Fly
Model Device: Nimbus_8
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : SW05_FLY_FS454_2016_09_26
Model Ext  : FS454

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1886 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731CEB_Nimbus_8_6.0_SW05_FLY_FS454_2016_09_26_FS454\
Done!

Elapsed: 00:13:25

Reconnect Power/Cable!

uploads 03.12.2016 11:39
Вложений: 1
Prestigio Wize N3 PSP3507 DUO
Цитата:
Operation : Read NV [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 26 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x00029670
Saved to : C:\Users\User\Desktop\Prestigio Wize N3 PSP3507 DUO\NV\CX_SPDNV.spdnv

Elapsed: 00:00:51

Reconnect Power/Cable!

leomin 09.01.2017 12:36
Успешное применение, без комментариев [InfinityBox CM2 SPD]
 
Beeline Smart 7 Q327 сброс FRP

Код:
Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x0000000071CF7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:01:01

Reconnect Power/Cable!

leomin 10.01.2017 10:01
Попадаются все гаджеты на процессоре Spreadtrum SC7731, с ними СМ2 справляется на ура. :)

Supra M74AG формат.

Код:
Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x000000005DBFB000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:43

Reconnect Power/Cable!

gulka 13.01.2017 10:48
BQ-7021G HIT Прошивка

Operation : Read FullFlash [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : BQ-7021G
Model Brand : BQ
Model Device: BQ-7021G
AndrVersion : 5.1
BaseBand CPU: BQ-7021G
Project Ver : s719b_cuser_20161117
Model Ext  : BQ-7021G

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.26.2_Release.bin
[Read Ok] : logo_800x1280.bin
[Read Ok] : fblogo_800x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1240 MiB
Saved to : C:\Users\TIMUR\Desktop\BQ-7021G_BQ-7021G_5.1_s719b_cuser_20161117_BQ-7021G\
Done!

Elapsed: 00:04:46

Reconnect Power/Cable!

motokmips 13.01.2017 17:29
Irbis TX35
Цитата:
Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : scx35_sp7731gea_k03_nm_nc74_64_8plus_dt
Model Brand : IRBIS
Model Device: scx35_sp7731gea_k03_nm_nc74_64_8
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_K03_NM_NC74_64_8
CompileDate : 28.10.2015 11:03:26
Project Ver : KOT49H 14B_test-keys
Model Ext : TX35

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:21

Reconnect Power/Cable!


Operation : Read NV [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x00029670
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\Irbis_TX35_CX_ SPDNV.spdnv

Elapsed: 00:00:53

Reconnect Power/Cable!

uploads 13.01.2017 22:19
Prestigio PSP3503
Цитата:
Model Name : PSP3503DUO
Model Brand : Prestigio
Model Device: PSP3503DUO
AndrVersion : 4.4.2
BaseBand CPU: SC7731
Project Ver : PSP3503DUO.20150709.1.0.11
Model Ext : PSP3503DUO

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1570 MiB
Saved to : C:\Users\User\Desktop\PSP3503\SC7731_PSP3503DUO_4. 4.2_PSP3503DUO.20150709.1.0.11_PSP3503DUO\
Done!

Elapsed: 00:06:11

Reconnect Power/Cable!

Nickeron 17.01.2017 10:44
Prestigio PSP3403DUO
 
Сброс графического ключа
Код:
Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x00000000801F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000013600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:22

Чтение FullFlash
Код:
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PSP3403DUO
Model Brand : Prestigio
Model Device: GF40B1G
AndrVersion : 5.1
BaseBand CPU: SC7731G
Project Ver : PSP3403DUO.20160903.1.0.12
Model Ext  : PSP3403DUO

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.43.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1380 MiB
Saved to : E:\SC7731G_GF40B1G_5.1_PSP3403DUO.20160903.1.0.12_PSP3403DUO\
Done!

Elapsed: 00:09:40

jblack 17.01.2017 15:26
Парни прячьте логи под теги [SPOILER] или хотя бы [CODE], а то не удобно просматривать темы, кому нужно тот раскроет и посмотрит.

Nickeron 20.01.2017 11:16
S-TELL C555 scx35_s7358_qhd
 
Operation : Check/Read Info [ v1.24 ]


Operation : Read FullFlash [ v1.24 ]


Operation : Flash [ v1.24 ]

cloud 20.01.2017 23:33
Цитата:
Сообщение от gulka (Сообщение 509075)
Встретил FLY FS454 Nimbus 8 на SPD, везде он MTK:confused:;)

Прочесть граф.ключ не смог , снес форматом
Аналогичная история, только SW04, ключ тоже не смог, и читается что интересно при выборе SP [SC7730/SC7731] EMMC Crev / Android 6.x как без галки Alternative LDR Mode так и с ней, а в примере выше вообще Boot Ver : Infinity SC773x eMMC v3 LDR, наверное поэтому что при чтении пишет ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!!

Чтение инфо без галки Alt Ldr


Чтение инфо с галкой Alt Ldr


Чтение прошивки без галки Alt Ldr


Текущее время: 15:06. Часовой пояс GMT +3.
Страница 3 из 5 12 3 45
Показывать 20 сообщений этой темы на одной странице

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd. Перевод: zCarot