GSM Форум - GSMForum.SU
Страница 16 из 21 « Первая 61415 16 1718 Последняя »
Показывать 20 сообщений этой темы на одной странице

GSM Форум - GSMForum.SU (https://gsmforum.su/index.php)
-   Infinity Box (https://gsmforum.su/forumdisplay.php?f=58)
-   -   Ошибки и обсуждение [CM2QLM Qualcomm] (https://gsmforum.su/showthread.php?t=107710)

yurii-62 14.05.2017 18:21
Xiaomi Redmi Note 3 SnapDragon 652 [MSM8976]

Error : Failed to convert data! Erased/Damaged device???
Send log and report.log to support! Include device info also!

Read_Flash

motokmips 15.05.2017 18:10
Lenovo S580, не дошивает?
 
Принесли висящим на заставке, QPST не прошивает, скачал MSM8610__LENOVO__Lenovo__ANDR_v4.3__Lenovo_S580__S 580__S580

Код:
Operation : Flash [ v1.11 ]
ForceFlashing : Disabled

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 068E8FDD
ID_BLOCK_I : 008140E1
ID_BLOCK_L : EA1A708E29B5A2AD9ACF010EC9902028
ID_BLOCK_L : 453886292AB525AE2392C73C36F9F7D4
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Files in Chain : 17
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : NON-HLOS.bin
Flashing : boot.img
Flashing : system.img
ProgStart  : start 282688, num 704
Flash Error , No ACK message! Check Battery charge , Cable

Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!
Висит на записи system.img пока кабель не вытащить.

shoxa907 23.05.2017 18:38
Новой версии замечена ошибка.

Micromax Q415 Reset FRP...

Код:
Operation : Reset Settings [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 0553F206
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 83651FE756DCC9C4A3987865A2F97951
ID_BLOCK_L : 0E45CB6257FE60E518D7B87173B2ACAF
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!
Код:
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.11


Operation : Reset Settings [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 0553F206
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 83651FE756DCC9C4A3987865A2F97951
ID_BLOCK_L : 0E45CB6257FE60E518D7B87173B2ACAF
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!

yurii-62 23.05.2017 21:18
Micromax Q415 ( ОС-W7-64..

Код:
peration : Read Flash [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 02F3D2A6
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 23C5BF47F67C69644338D8C50259D9F1
ID_BLOCK_L : AEA56BC2B75E8005B877589193120C4F
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!
С [ v1.11 ] все ок.

ddilshod93 24.05.2017 09:29
1.12 лог с который 22-мая вложений проверили или 21-мая ?
22-май исправил наверно это ошибка.

yurii-62 24.05.2017 11:54
От 22 мая все ок...

Код:
Operation : Read Flash [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 02F3D2A6
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 23C5BF47F67C69644338D8C50259D9F1
ID_BLOCK_L : AEA56BC2B75E8005B877589193120C4F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000/00000200
Boot Ok!


Brand    : Micromax
ProdName  : Q415
ProdModel : Micromax Q415
Device    : Q415
AndroidVer: 5.1.1
Manufact. : Micromax
QLMxCPU  : MSM8909

DevInfo : MSM8909__Micromax__Micromax__ANDR_v5.1.1__Micromax_Q415__Q415__Q415

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : oem.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 2244 MiB

Done!
Elapsed: 00:04:01

Reconnect Power/Cable!

ddilshod93 26.05.2017 13:20
Brand : Xiaomi
ProdName : gemini
ProdModel : MI 5
AndroidVer: 6.0
QLMxCPU : MSM8996

Read info/Read Factory Flash.

:icq54:
Код:
Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 056D1E4B
ID_BLOCK_I : 009470E1
ID_BLOCK_L : A1C4D66D8B6A3F0B67CB5AA4594CAE5C
ID_BLOCK_L : 83FF4825E255CB6141F0FBF1103D13CE
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000200
Boot Ok!



Brand    : Xiaomi
ProdName  : gemini
ProdModel : MI 5
Device    : gemini
AndroidVer: 6.0
Manufact. : Xiaomi
SysPatch  : MRA58K
QLMxCPU  : MSM8996

Done!
Elapsed: 00:00:07

Reconnect Power/Cable!

Connect device in fastboot mode ...
Connect Ok!
Trying set EDL mode ...
If device not reboot in EDL - use KEYS combination/EDL cable/TP
Operation finished!


Operation : Read Flash [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 056D1E4B
ID_BLOCK_I : 009470E1
ID_BLOCK_L : A1C4D66D8B6A3F0B67CB5AA4594CAE5C
ID_BLOCK_L : 83FF4825E255CB6141F0FBF1103D13CE
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000200
Boot Ok!


Brand    : Xiaomi
ProdName  : gemini
ProdModel : MI 5
Device    : gemini
AndroidVer: 6.0
Manufact. : Xiaomi
QLMxCPU  : MSM8996

DevInfo : MSM8996__Xiaomi__Xiaomi__ANDR_v6.0__MI_5__gemini__gemini

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : devcfg.mbn
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main1.bin
[Read Ok] : xbl.elf
[Read Ok] : gpt_backup1.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : gpt_backup2.bin
[Read Ok] : gpt_main3.bin
[Read Ok] : ddr.bin
[Read Ok] : gpt_backup3.bin
[Read Ok] : gpt_main4.bin
[Read Ok] : pmic.bin
[Read Ok] : rpm.mbn
[Read Ok] : hyp.mbn
[Read Ok] : tz.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : btfm.mbn
[Read Ok] : fs_gc.img
[Read Ok] : bk8.bin
[Read Ok] : lsplash.img
[Read Ok] : adspso.bin
[Read Ok] : splash.img
[Read Ok] : mdtp.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : cust.img
[Read Ok] : system.img
[Read Ok] : bk9.bin
[Read Ok] : gpt_backup4.bin
[Read Ok] : gpt_main5.bin
[Read Ok] : bk10.bin
[Read Ok] : bk11.bin
[Read Ok] : bk12.bin
[Read Ok] : gpt_backup5.bin

Android Info saved!
Read finished!
Configuration : MSM8996 / UFS
Firmware Size : 1965 MiB

Done!
Elapsed: 00:02:58

Reconnect Power/Cable!
Memory Tools работает с 4 драйвер.

Код:
Operation : Memory Tool Init [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 056D1E4B
ID_BLOCK_I : 009470E1
ID_BLOCK_L : A1C4D66D8B6A3F0B67CB5AA4594CAE5C
ID_BLOCK_L : 83FF4825E255CB6141F0FBF1103D13CE
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000200
Boot Ok!

Set default path : C:\InfinityBox\CM2QLM\phdata\

Ready!

Operation : Change Current Drive [ v1.12 ]
Switch to DRIVE #1

Operation finished!

Operation : Change Current Drive [ v1.12 ]
Switch to DRIVE #2

Operation finished!

Operation : Change Current Drive [ v1.12 ]
Switch to DRIVE #3

Operation finished!

Operation : Change Current Drive [ v1.12 ]
Switch to DRIVE #4

Operation finished!

Operation : Read Memory  [ v1.12 ]

Reading selected partitions [3]
[0] Read partition : PMIC
Saved to : C:\InfinityBox\CM2QLM\phdata\PMIC.bin
[1] Read partition : PMICBAK
Saved to : C:\InfinityBox\CM2QLM\phdata\PMICBAK.bin
[2] Read partition : FSG
Saved to : C:\InfinityBox\CM2QLM\phdata\FSG.bin
Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:04:53

Reconnect Power/Cable!

Alex_Tom 29.05.2017 10:24
Цитата:
Сообщение от ddilshod93 (Сообщение 513556)
Brand : Xiaomi
ProdName : gemini
ProdModel : MI 5
AndroidVer: 6.0
QLMxCPU : MSM8996

Read info/Read Factory Flash.
скажите, у Вас сохраненный бекап программа воспринимает? у меня при загрузке следующее
Flash Select

дважды пробовал сливать бекап

мой info
Identify

ddilshod93 29.05.2017 11:53
Цитата:
Сообщение от Alex_Tom (Сообщение 513656)
скажите, у Вас сохраненный бекап программа воспринимает? у меня при загрузке следующее
Flash Select

дважды пробовал сливать бекап

мой info
Identify

Привет, у меня тоже такой же ошибка видал.
я сделал так все это файлов bk8.img,9,10,11,12. переместил в папка экстра, прошил все успешно прошло.
Наверно это Павел ака тоже заметил в следующее обновление исправить ошибка.

JayDi 29.05.2017 12:05
Мне бы эти 8,9,10,11,12 образы в архив на поглядеть.

ddilshod93 29.05.2017 12:07
Вложений: 1
Цитата:
Сообщение от JayDi (Сообщение 513660)
Мне бы эти 8,9,10,11,12 образы в архив на поглядеть.
вот пожалуйста.

Alex_Tom 29.05.2017 12:46
Вложений: 1
мои - на всякий случай

motokmips 29.05.2017 17:40
Коллеги подскажите, что не так, не считывает Redmi 3s, спец. кабелем перевожу в EDL, драйвера Nokia Emergency Connectivity
Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 0D1DFC4C
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : C28F1C3A8281772AAB3D8BFA6EDC3C13
ID_BLOCK_L : E7116BCA0D2C26F4E37A9F8AF5618DF0
Use CM2 Internal Loader
FH_LOAD_CODE : 11

Error : Loader send failed!
Check cable, connection and drivers!

ddilshod93 29.05.2017 18:01
Цитата:
Сообщение от motokmips (Сообщение 513673)
Коллеги подскажите, что не так, не считывает Redmi 3s, спец. кабелем перевожу в EDL, драйвера Nokia Emergency Connectivity
Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 0D1DFC4C
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : C28F1C3A8281772AAB3D8BFA6EDC3C13
ID_BLOCK_L : E7116BCA0D2C26F4E37A9F8AF5618DF0
Use CM2 Internal Loader
FH_LOAD_CODE : 11

Error : Loader send failed!
Check cable, connection and drivers!
вы с этим проверили ?

motokmips 29.05.2017 20:09
Да, дополнительно ещё и с сайта поддержки №1, качал от 22/05

motokmips 30.05.2017 16:49
Проблема решена- не качественный кабель!!! А ведь работал раньше...
 
Card found : 1111111 , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.12

Код:
Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 0D1DFC4C
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : C28F1C3A8281772AAB3D8BFA6EDC3C13
ID_BLOCK_L : E7116BCA0D2C26F4E37A9F8AF5618DF0
Use CM2 Internal Loader
FH_LOAD_CODE : 11

Error : Loader send failed!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...

Error : Fail to init protocol!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...

Error : Fail to init protocol!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...

Error : Fail to init protocol!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 0D1DFC4C
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : C28F1C3A8281772AAB3D8BFA6EDC3C13
ID_BLOCK_L : E7116BCA0D2C26F4E37A9F8AF5618DF0
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!



Brand    : Xiaomi
ProdName  : land
ProdModel : Redmi 3S
Device    : land
AndroidVer: 6.0.1
Manufact. : Xiaomi
SysPatch  : MMB29M
QLMxCPU  : MSM8937

Done!
Elapsed: 00:00:11

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 0D1DFC4C
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : C28F1C3A8281772AAB3D8BFA6EDC3C13
ID_BLOCK_L : E7116BCA0D2C26F4E37A9F8AF5618DF0
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


Error : FS verification fail! Encrypted or damaged!

Reconnect Power/Cable!

Bexruz.19 30.05.2017 18:16
Mi5sPlus подцепить не смог (((

Цитата:
Operation : Read Flash [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 821 [MSM8996 Pro]
ID_BLOCK_S : ECD7BDBB
ID_BLOCK_I : 0005F0E1
ID_BLOCK_L : 315446FD1BFAAFBBF7BBCA14C9DCDECC
ID_BLOCK_L : 1561E6B37CC32197DF46611BFA93A550
Use CM2 Internal Loader
Loader Sent! Initializing ...

Error : FH Configuration failed!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

JayDi 30.05.2017 21:08
Если бы кто помог мне удаленно его протестировать - было бы замечательно. Тушка тестовая еще не скоро доедет до меня.

ddilshod93 31.05.2017 08:44
Павел ака как с вами связаться если будет такой аппарат ? иску не отвечаете или вобщим не заходите :confused:

chekm 31.05.2017 16:27
ZTE Axon 7 mini_ B2017G (USA Model)
 
snapdragon 617 - Android 6.0.1

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 01CD62C1
ID_BLOCK_I : 009720E1
ID_BLOCK_E : 00000004
ID_BLOCK_L : B2149DA38149BCF147F1E5A58FC94C3E
ID_BLOCK_L : D430F9279C8F648F6E994E044B7A8E43
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!


Текущее время: 03:35. Часовой пояс GMT +3.
Страница 16 из 21 « Первая 61415 16 1718 Последняя »
Показывать 20 сообщений этой темы на одной странице

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd. Перевод: zCarot