Phoenix Service Software - 2009.34.7.40015 от 27.10.09

[gulka]

Phoenix Service Software - 2009.34.7.40015

New features:

- Touch Screen Calibration
- ALS Tuning Wizard
- Error corrections & changes:
- Flash Update Package 09.042.032
- New rf_losses.ini
- Product Code change improvements for RX-51
- Dynamic Country of origin in label printing shows country names in clear text if product specific configuration / data package supports it.
- Several improvements for the RX-51 product, please refer to product specific Service Bulletins for further instructions
- Changes to DCT-4 IMEI / ESN rebuild.

Known errors & limitations:

- Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
- Flashing with FLS-5, SS-46 and product specific adapter is not reliable for all BB 5.0 products.
- If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
- Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one, do not attempt to service more than 5 phones at the time
- Some phone models request SIM Lock data to be written in wrong format. - You should use special DLL as a workaround for this product software related -problem. Please see Common SB SB-102 “Tucson Add-On Components for SIM Lock version
- While performing restore or variant change operations with Tucson system firmware update as a separate activity may increase stability.
- DCT-4 IMEI / ESN Rebuild functionality is limited. Corrections will be available when new Flash Update Package is released during week 45/2009
- Operating band reading / writing may not work for all products (e.g. RM-159), due to implementation in phone SW. Phoenix modifications will be available in an additional Phoenix release estimated for week 43/2009. This function can also be done via phone keypad.
- Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
- FPS-21 flashing for RX-51 works only with TCPIP connection, if FPS-21 prommer HW is older than 10. USB connection works if FPS-21 HW is 10 or newer.

DOWNLOAD LINK

[Nicolayer]

Вот его кр*кнутая версия
http://*****************************/files/29968002..._2009.34.7.exe

BR.

[mel0man]

Phoenix_Service_Software_2009_34_14_40684

New version of Phoenix service software is available. This multi-protocol service software supports Nokia
CDMA, GSM, TDMA, and WCDMA products.
Service SW installation packages and Technical Bulletins are available from NOL.
Main component versions in the release:
*****9558; DK2 Driver Version 07.14.0.25
*****9558; Nokia Connectivity Cable USB Driver Version 7.1.17.0 (For Win2000 driver version 6.85.15.0)
*****9558; Flash Update Package 09.048.024
*****9558; FLS-x Drivers Version 2.09.28
*****9558; FPS-11Version 5.10.0

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2009. 34.10.40495

New Products added
*****9558; RM-614, RM-615, RM-381, RM-598 , RM-604, RM-582, RM-521, RM-522, RM-658, RM-638, RM-
606, RM-664, RM-626
New features
*****9558; Flash Update Package 09.048.024
*****9558; RF Final Test *****251; feature added.
- If you can find *****244;RF Final Test*****246; item from *****244;Testing*****246; *****251; menu when product is connected,
product supports this function
- RF Final test uses the same product specific configuration file as RF Auto Tuning and
works when same equipment and tools are used
- If you experience problems with either function, please check the other.
- If either one works, please report issue to the product program so that data package
configuration can be checked.
Error Corrections & changes
*****9558; Login dialog removed
*****9558; Dead phone USB stability improvements
*****9558; Autotuning components updated to new version
*****9558; Label printing corrections for E72

KNOWN ERRORS & LIMITATIONS

*****9558; Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data
Package 2 concept.
*****9558; Flashing with FLS-5, SS-46 and product specific adapter is not supported anymore
*****9558; If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong.
This is caused by very old DCT-4 data packages which contain Flash Update Package and
overwrite current information during installation. If you experience problems when updating FPS-x
prommers, please check that Phoenix *****244;Prommer maintenance*****246; is looking for the files from the
correct location which is *****244;C:Program FilesCommon FilesNokiaTssFlash*****246;. If not, Phoenix will
show error *****244;Update via ini *****251; file failed*****246;. In this case, select *****244;Update*****246; from that Phoenix *****244;Prommer
maintenance*****246; *****251; UI, browse to correct directory and select *****244;fpsxupd.ini*****246; for all other prommers
except the FPS-8. Multi Flash has limited capabilities, launch Multiflash UI first and then connect
phones one by one, do not attempt to service more than 5 phones at the time
*****9558; Some phone models request SIM Lock data to be written in wrong format. You should use special
DLL as a workaround for this product software related problem. Please see Service SW
Application *****244;Tucson Add-On Components for SIM Lock versions*****246;
*****9558; While performing restore or variant change operations with Tucson system firmware update as a
separate activity may increase stability.
*****9558; Refurbishment flashing and product code change for RX-51 product requires SX-4 card to
be available
*****9558; FPS-21 flashing for RX-51 works only with TCPIP connection, if FPS-21 prommer HW is
older than 10. USB connection works if FPS-21 HW is 10 or newer.
-Please refer to product specific documents and instructions concerning the limitations of
the RX-51 product

http://*****************************/files/32260083...yutthana .exe

[mel0man]

новый линк http://filekeeper.org/download/mel0m...4_14_40684.exe

[mel0man]

Main component versions in the release:
· DK2 Driver Version 07.14.0.25
· Nokia Connectivity Cable USB Driver Version 7.1.17.0 (For Win2000 driver version 6.85.15.0)
· Flash Update Package 09.048.024
· FLS-x Drivers Version 2.09.28
· FPS-11Version 5.10.0
 MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2009. 34.10.40495
 New Products added
· RM-614, RM-615, RM-381, RM-598 , RM-604, RM-582, RM-521, RM-522, RM-658, RM-638, RM-606, RM-664, RM-626
 New features
· Flash Update Package 09.048.024
· RF Final Test  feature added.
- If you can find “RF Final Test” item from “Testing” – menu when product is connected, product supports this function
- RF Final test uses the same product specific configuration file as RF Auto Tuning and works when same equipment and tools are used
- If you experience problems with either function, please check the other.
- If either one works, please report issue to the product program so that data package configuration can be checked.
 Error Corrections & changes
· Login dialog removed
· Dead phone USB stability improvements
· Autotuning components updated to new version
· Label printing corrections for E72
Some Changes
· when you uninstall the phoenix,it will uninstall all drivers
· add English language when installing
· some changes of interface

http://filekeeper.org/download/mel0m...4_40684_v2.exe

[mel0man]

Some Changes
· Install package is just  90M
· add English language when installing
· some changes of interface

http://filekeeper.org/download/mel0m...4_40684_v3.exe

[Shukhrat]

http://forum.allnokia.ru/viewtopic.php?t=24242

Phoenix Service Software 2009_34_14_40684 NEW

[mel0man]

Phoenix Service Software 2010.08.004.41526

This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software 2010.8.4.41526
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.23.0
- Flash Update Package 09.050.025
- FLS-x Dongle Driver v 2.09.28

Changes/improvements made from previous version 2009.34.14.40684:
New products added:
- RM-601, RM-656, RM-657, RM-659, RM-559, RM-610, RM-618, RM-639,
RM-632, RM-633, RM-634
Products removed:
- RM-623

New features:
- Nokia Connectivity Cable USB Driver Version 7.1.23.0
- Flash Update Package 09.050.025
- Menu item WLAN Auto tune added for E72 product
- New RF Losses.ini v 47 for auto tune
- Product Code Change *****251; window is now scalable, SW version information
for variants can now be seen if window is made larger.
Error corrections & changes:
- Support for FPS-8 and FPS-11 Flash Prommers removed
- Bluetooth Flasher *****251; menu removed
- Flash Memory test removed
- Changes to WLAN UI to support new WLAN component versions
- Auto tuning components updated to new version
- Label printing changes to improve handling of older data package
configurations. If product has older data package configuration, the user is
advised to enable this option from the label printing UI
- Improvements to Data Package Download. When computer has active
internet connection, product code specific SW files are downloaded from
Firmware Repository. Please note that the path for downloading files
must also be configures to *****244;Options / Product Location*****246; - UI. If paths
are not the same, downloaded SW files are not found.
- Registration error for manual TX power level tuning component corrected.
- Minor menu Changes for RM-598 and RM-604
Known errors & limitations:
- Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package 2 concept.
- Flashing with Flashing with FLS-5, SS-46 and product specific adapter is
not supported anymore
- If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating
FPS-x prommers, please check that Phoenix *****244;Prommer maintenance*****246; is
looking for the files from the correct location which is *****244;C:Program
FilesCommon FilesNokiaTssFlash*****246;. If not, Phoenix will show error
*****244;Update via ini *****251; file failed*****246;. In this case, select *****244;Update*****246; from that Phoenix
*****244;Prommer maintenance*****246; *****251; UI, browse to correct directory and select
*****244;fpsxupd.ini*****246; for all other prommers except the FPS-8.
- Multi Flash has limited capabilities, launch Multiflash UI first and then
connect phones one by one, do not attempt to service more than 5
phones at the time
- Some phone models request SIM Lock data to be written in wrong format.
You should use special DLL as a workaround for this product software
related problem. Please see Common SB SB-102 *****244;Tucson Add-On
Components for SIM Lock version*****246;
- While performing restore or variant change operations with Tucson
system firmware update as a separate activity may increase stability.
- Refurbishment flashing and product code change for RX-51 product
requires SX-4 card to be available
- FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21
prommer with new HW version is needed to correct this, and it is
estimated to be available during 2nd half of 2010
- Please refer to product specific documents and instructions
concerning the limitations of the RX-51 product

----------------------------------------------------------------------
оригинал
http://filekeeper.org/download/mel0m..._8_4_41526.exe
накряченый
http://filekeeper.org/download/mel0m..._Cracked .exe
без ограничений по скачиванию