Nokia 210 (rm-928) при прошивке выдает ошибку

[madar]

Пришел моргалик, пошил с помощью BEST, выдавало ошибку (лог ниже), прошил с помощью ATF--прошилось без ошибок и завелось.

Connect phone on selected interface...

Core : v1.83 , BB5XG FlashEngine : v9.6

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm928__06.09.mcusw
PPM : rm928__06.09.ppm_i2
CNT : rm928__06.09.image_i2_059R932
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.56_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm928__06.09.mcusw
Image : rm928__06.09.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:06 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01A40000
Erasing, wait ... 
Erase done, time : 00:02:35 
Write , Start : 0x40280000 , Len : 0x01A40000
Flashing , wait ...
Region flash done, time : 00:00:38
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0xA526

   ===Flashing [PPM]===
File : rm928__06.09.ppm_i2
Image : package_i2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41CC0000 , Len : 0x00640000
Erasing, wait ... 
Erase done, time : 00:00:28 
Write , Start : 0x41CC0000 , Len : 0x004903AC
Flashing , wait ...
Region flash done, time : 00:00:05
CRC check passed , 0x0DBC

   ===Flashing [CNT]===
File : rm928__06.09.image_i2_059R932
Image : package_i2_059R932.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42300000 , Len : 0x01B20000
Erasing, wait ... 
Erase done, time : 00:00:32 
Write , Start : 0x42300000 , Len : 0x00D40000
Flashing , wait ...
Region flash done, time : 00:00:16
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
[ERR_hReqFlashEraseStart] : 8201410040000000
Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...


Elapsed: 00:05:26
Connect phone on selected interface...