GSM Форум - GSMForum.SU  

Вернуться   GSM Форум - GSMForum.SU > Мобильные телефоны > Philips > Philips - для новичков

Philips - для новичков Раздел для недавно зарегистрировавшихся пользователей. Настройка Интернета, мобильный контент, русификация, ремонт, обсуждение моделей и т.п.

Ответ
 
Опции темы Рейтинг: Рейтинг темы: голосов - 16, средняя оценка - 5.00. Опции просмотра
Старый 31.03.2009, 14:03   #1
Jim79
Новичок
 
Регистрация: 27.02.2009
Сообщений: 4
Поблагодарил: 0
Поблагодарили 0 раз за 0 сообщений
Репа: 0
FULL RESET подскажите код

подскажите код для полного сброса на телефоне PHILIPS 6618
Jim79 вне форума   Ответить с цитированием Вверх
Старый 09.09.2009, 09:52   #2
ziam
Пользователь
 
Аватар для ziam
 
Регистрация: 15.06.2005
Адрес: минск сити
Сообщений: 85
Поблагодарил: 41
Поблагодарили 22 раз за 17 сообщений
Репа: 16
вроде d картой просто набрать
*#7728*# Тело должно перегрузиться и сбросить все настройки
ziam вне форума   Ответить с цитированием Вверх
Старый 24.09.2009, 18:21   #3
dima84
Новичок
 
Регистрация: 11.05.2007
Сообщений: 12
Поблагодарил: 15
Поблагодарили 2 раз за 2 сообщений
Репа: 0
*#7728*# мне помогло
dima84 вне форума   Ответить с цитированием Вверх
Старый 25.09.2009, 13:08   #4
KarenMno
Новичок
 
Регистрация: 05.08.2009
Сообщений: 7
Поблагодарил: 9
Поблагодарили один раз в одном сообщении
Репа: 0
набираешь без симкарты #20021208# жмешь кнопку вызова, потом ок. Ждешь перезагруза и радуйся

Код HTML:
Добавлено позже:
Типа Филипс 568.
#20021208#
*#7728*#
*#7337*#
*#3353*#
Philips  CODE 
*#4732*#  - for read soft wersion
------------------------------------------------
Добавлено позже:
Мастер-коды 

--------------------------------------------------------------------------------

VK 85558555#удерживаем*
*#85*364# и *удерж.
Samsung *2767*2878#
Sagem *226632623X7,где Х=4 или 5 вниз *
Pantech *01763*737381#
Panasonic A100 *01763*737381#
LG *6861#
2945#*
Maxon *#9915#
Motor T20x/T19x *#311# ok
19980722 ok
Philips *#7489*#
Siemens S40 *#337#
Sony *#73287489263373738#
Trium hold * 3926
Alcatel ###337*07#
Alcate BE4, BE5 83227423,
Motorola C200, C205 - 20010903,
Samsung *#9998*947# (без SIM)
VK Mobile 20x - 4268#*(Hold)
Alcatel - ###847# - Master Reset
------------------------------------------------
Добавлено позже:
Here ***** ALL THE SECRET CODES ***** 4 all gsm 

--------------------------------------------------------------------------------

for sumsung

*#9998*228# : Battery status (capacity, voltage, temperature) 
*#9998*246# : Program status 
*#9998*289# : Change Alarm Buzzer Frequency 
*#9998*324# : Debug screens 
*#9998*364# : Watchdog 
*#9998*377# : EEPROM Error Stack - Use side keys to select values. Cancel and ok. 
*#9998*427# : Trace Watchdog 
*#9998*523# : Change LCD contrast - Only with version G60RL01W 
*#9998*544# : Jig detect 
*#9998*636# : Memory status 
*#9998*746# : SIM File Size 
*#9998*778# : SIM Service Table 
*#9998*785# : RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.
*#9998*786# : Run, Last UP, Last DOWN 
*#9998*837# : Software Version 
*#9998*842# : Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# : Vocoder Reg - Normal, Earphone or carkit can be selected 
*#9998*872# : Diag 
*#9998*947# : Reset On Fatal Error 
*#9998*999# : Last/Chk 

*#9998*9266# : Yann debug screen (=Debug Screens?) 
*#9998*9999# : Software version 

If the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to *#0523#. An other thing that will help is to remove your SIM card. *0001*s*f*t# : Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# : unknown 
*0003*?# : unknown 

SP-unlock SGH-600 (and also SGH-Sgh-600)
*2767*3855# : Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) 
But also changes IMEI to 447967-89-400044-0. (Doing this is illegal) 

*2767*2878# : Custom EEEPROM Reset 

*These codes have been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

for d500

*#11*****91;quote*****93;11# S/W Version 
*#1234# Firmware Version 
*#2222# H/W Version 
*#8999*8376263# All Versions Together 

*#8999*8378# Test Menu 
*#4777*8665# GPSR Tool 
*#8999*523# LCD Brightness 
*#8999*377# Error Menu 
*#8999*327# EEP Menu 
*#8999*3825523# Don't Know. 
*#8999*667# Debug Mode 
*#92782# PhoneModel (Wap) 
#*5737425# JAVA Mode 
*#2255# Call List 
*#232337# Bluetooth MAC Adress 
*#5282837# Java Version 

#*4773# Incremental Redundancy 
#*7752# 8 PSK uplink capability bit 
#*7785# Reset wakeup & RTK timer cariables/variables 
#*1200# ???? 
#*7200# Tone Generator Mute 
#*3888# BLUETOOTH Test mode 
#*#8999*324# ?? 
#*7828# Task screen 
#*5111# ?? 
#*#8377466# S/W Version & H/W Version 
#*2562# Restarts Phone 
#*2565# No Blocking? General Defense. 
#*3353# General Defense, Code Erased. 
#*3837# Phone Hangs on White screen 
#*3849# Restarts Phone 
#*3851# Restarts Phone 
#*3876# Restarts Phone 
#*7222# Operation Typ: (Class C GSM) 
#*7224# !!! ERROR !!! 
#*7252# Operation Typ: (Class B GPRS) 
#*7271# CMD: (Not Available) 
#*7274# CMD: (Not Available) 
#*7337# Restarts Phone (Resets Wap Settings) 
#*2787# CRTP ON/OFF 
#*2886# AutoAnswer ON/OFF 
#*3737# L1 AFC 
#*5133# L1 HO Data 
#*7288# GPRS Detached/Attached 
#*7287# GPRS Attached 
#*7666# White Screen 
#*7693# Sleep Deactivate/Activate 
#*7284# L1 HO Data 
#*2256# Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt) 
#*2286# Databattery 
#*2527# GPRS switching set to (Class 4, 8, 9, 10) 
#*2679# Copycat feature Activa/Deactivate 
#*3940# External looptest 9600 bps 
#*4263# Handsfree mode Activate/Deactivate 
#*4700# Please use function 2637 
#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF) 
#*2558# Time ON 
#*3370# Same as 4700 
#*3941# External looptest 115200 bps 
#*5176# L1 Sleep 
#*7462# SIM Phase 
#*7983# Voltage/Freq 
#*7986# Voltage 
#*8466# Old Time 
#*2255# Call Failed 
#*5187# L1C2G trace Activate/Deactivate 
#*5376# DELETE ALL SMS!!!! 
#*6837# Official Software Version: (0003000016000702) 
#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07) 
#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01) 
#*2337# Permanent Registration Beep 
#*2474# Charging Duration 
#*2834# Audio Path (Handsfree) 
#*3270# DCS Support Activate/Deactivate 
#*3282# Data Activate/Deactivate 
#*3476# EGSM Activate/Deactivate 
#*3676# FORMAT FLASH VOLUME!!! 
#*4760# GSM Activate/Deactivate 
#*4864# White Screen 
#*5171# L1P1 
#*5172# L1P2 
#*5173# L1P3 
#*7326# Accessory 
#*7683# Sleep variable 
#*8465# Time in L1 
#*2252# Current CAL 
#*2836# AVDDSS Management Activate/Deactivate 
#*3877# Dump of SPY trace 
#*7728# RSAV 
#*2677# Same as 4700 
#*3797# Blinks 3D030300 in RED 
#*3728# Time 2 Decod 
#*3725# B4 last off 
#*7372# Resetting the time to DPB variables 
#*7732# Packet flow context bit Activate/Deactivate 
#*6833# New uplink establishment Activate/Deactivate 
#*3273# EGPRS multislot (Class 4, 8, 9, 10) 
#*7722# RLC bitmap compression Activate/Deactivate 
#*2351# Blinks 1347E201 in RED 
#*4472# Hysteresis of serving cell: 3 dB 
#*2775# Switch to 2 inner speaker 
#*9270# Force WBS 
#*7878# FirstStartup (0=NO, 1=YES) 
#*3757# DSL UART speed set to (LOW, HIGH) 
#*8726# Switches USBACM to Normal 
#*8724# Switches USBACM to Generator mode 
#*8727# Switches USBACM to Slink mode 
#*8725# Switches USBACM to Loop-back mode 
#*3838# Blinks 3D030300 in RED 
#*2077# GPRS Switch 
#*2027# GPRS Switch 
#*0227# GPRS Switch 
#*0277# GPRS Switch 
#*22671# AMR REC START 
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr) 
#*22673# Pause REC 
#*22674# Resume REC 
#*22675# AMR Playback 
#*22676# AMR Stop Play 
#*22677# Pause Play 
#*22678# Resume Play 
#*77261# PCM Rec Req 
#*77262# Stop PCM Rec 
#*77263# PCM Playback 
#*77264# PCM Stop Play 
#*2872# CNT 
*#8999*283# ??? 
#*22679# AMR Get Time 
*288666# ??? 
*2886633# ??? 
*#8999*364# Watchdog

nokia cdma


*3001#12345#

LG CDMA SECRETS CODES 

Field Test MENU > 0 > 000000 > Field Test Other Programming Secrets:

LGC-300 programming:

menu + 9 and enter SPC: "000000" or may be other SPC typed by user. A-Key: press STO for some time while you can see special code enter zone. Type 2539**** and enter A-key

LGC-330W programming:

menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539**** and enter A-key

LGC-800W /500 programming:

menu + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539**** and enter A-key

LGC-510 programming: 

menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539**** and enter A-key

LG1010, LG4NE1, TP2200, TP2100, Touchpoint, SB/DB, TP1100 and TP5200

Press ## Enter the OTKSL Scroll to SAVE and press OK Scroll to MIN and press OK Enter 10 digit MIN scroll to SAVE and press OK Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete) Enter SID (4654) and scroll to SAVE and press OK Programming is complete

LG5350

Enter ## and enter the OTKSL and press the left soft key under the word “Save” At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key Enter the 10 digit MIN and press OK Scroll down to 4. Advanced and press OK Scroll to NMSI and press OK Enter the MSID and press OK Scroll down to 9. Amps Phone # and press OK Enter the MSID and press OK

Press the END key


MOTOROLA PROGRAMING CODES 

Analog Models

Changing the Banner: #PROGRAM# or *****91;Fcn*****93; 0000000000000 (13 0's)

Field Test: *****91;Fcn*****93; 0 0 * * TESTMODE *****91;Sto*****93; 

Reset Timers: Follow the Field Test procedure above and then #32#

Alternative Programming Menu: #55#

(Not sure): # *****91;SID code*****93;#* SEND

Programming of various other models:

V60c Programming Mode:

74663 # *****91;Menu*****93; *****91;Menu*****93; (you will need the programming code)

Field Test: *****91;Menu*****93; 073887 * (you will need the security code -- try 000000)

To deactivate field test: Power phone up, hit MENU and the left button (should bring up the menu). There's a menu option for test-mode and at this point you can turn the menu off and return the phone to normal. Alternatively press menu and then the nearest button to the left (Phone book button) quickly and it will take you back to the main screen and your phone will look normal. 

StarTac 7790

Field Test: *****91;Fcn*****93; 0 0 * * TESTMODE *****91;Sto*****93;

StarTac 7760, 7860

Field Test: *****91;Fcn*****93; 0 0 * * TESTMODE *****91;Sto*****93; Service Menu: *****91;Fcn*****93; 0 000000 000000 RCL

Complete system test (most models): (Phone OFF), Hold down any row of keys (1+2+3, 4+5+6, etc) and turn the phone ON 

To access the diagnostic mode on the I30: #, *, MENU, JOYSTICK-RIGHT (Do these keystrokes fast)

To access the diagnostic mode on any of the older iDEN phones (pre-i1000): VOLUME DOWN, MENU, MENU, MENU, LEFT, MENU, MENU, LEFT (this is the reverse of the test menu routine)

To access the diagnostic mode on any of the new models (i1000+, i700+, i550+, etc): Hold down any three keys in a row across. 

The unit will enter the test mode and can be stepped through the various functions with the keys and buttons. At the end of the test, power cycle the unit to return to normal function. This test will check various phone functions, including LCD display, speaker, earphone, microphone, LEDs, vibrator, backlight and all of the buttons and keys for the newer models

SAMSUNG CDMA SECET CODES 

Older Models:

NAM Programming: 47*869#08#9

Test mode: *759#813580 OR 5809540*45680

Exit Test Mode: 02 A-Key: menu + 0,

code 25##

Samsung SPH-T100

MENU 820 > 810325

Samsung SCH-3500 

MENU 820 > 295184

Programming of various other models:

Samsung A500

Enter ## and the 6 digitOTKSL

SERVICE MENU will appear and 1.Basic will be highlighted

Press OK Device will display NAM CDMA/ Phone Number 

Enter 10 digit MIN Press OK (3 times) Display will return to Service Menu. 

Press END. Programming is complete

Samsung N240 and N400

Enter ## and type in the 6 digit OTKSL

The display will show SVC MENU and 1. Phone Number 

Press OK Enter the 10 digit MIN and press OK

The display will show NAM with Home SID on the second line (Note: SID is no longer used) 

Press OK

The display will return to the SVC MENU 

Press END to complete the programming 


Samsung N300 

Press ## followed by the OTKSL 
SVC menu will be displayed 
Press 1 for Phone # 
Enter the 10 digit MIN and press OK 
MIN that was entered will be displayed press OK 
SVC Menu will display press 3 for NAM 
Enter the 4 digit Home SID press OK 
Press END and handset will power cycle 

Samsung i300 
Tap on the Phone Icon with stylus 
Press #907*9#0 ENTER LOCK should appear on screen 
ENTER OTKSL 
SVC MENU will appear press 1 
Enter 10 digit MIN and then press SAVE 
Press SAVE again 
Press 3 and then press SAVE 6 times 
Enter the HOME SID and press SAVE once 
Press END key twice 

Samsung A400 and A460 
Enter ## and OTKSL 
Press 1 for Basic at MENU (1 of Phone # when using the MSL) 
Enter 10 digit MIN and press OK 
At 1.Basic Menu press the END key 
Handset will power cycle 

Samsung 3500, 8500, 6100, and N200 
Press MENU 
Press 6 0 (3500) 8 2 0 (8500/6100/N200) 
Enter OTKSL 
Press 1 at SVC MENU Screen 
Enter MIN and press OK 
Press OK 4 times 
Enter SID (4654) and press OK 
Press END key 
Programming is complete

gsm NOKIA SECRET CODES 

Nokia CodesThese Nokia codes will work on most Nokia mobile phones, however we accept no responsibility of any kind for damage done to your phone whilst trying these Nokia secret codes. 

Nokia code Code function 

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%

#3370# Deactivate Enhanced Full Rate Codec (EFR) 

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time 

*#4720# With this Nokia code you can deactivate the Half Rate Codec 

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type 

*#9999# Phones software version if *#0000# does not work *#06# For checking the International Mobile Equipment Identity (IMEI Number) 

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) 

#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) 

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) 

#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

GSM SAMSUNG SECRET CODES 

*#06# -> Show IMEI

*#9999# -> Show Software version 

*#0837# -> Show Software Version (instructions) 

*#0001# -> Show Serial Parameters 

*#9125# -> Activates the smiley when charging. 

*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status 

*#9998*289# -> Change Alarm Buzzer Frequency 

*#9998*324# -> Debug screenslect values. Cancel and ok. 

*#9998*427# -> Trace Watchdog 

*#9998*523# -> Change LCD contrast - Only with version G60RL01W 

*#9998*544# -> Jig detectService Table 

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put inmemory error. 

*#9998*786# -> Run, Last UP, Last DOWN 

*#9998*837# -> Software Version 

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibrationactivated. 

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected 

*#9998*872# -> Diag 

*#9998*947# -> Reset On Fatal Error 

*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?) 

*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete) 

*0002*?# -> unknown 

*0003*?# -> unknown SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) But also changes IMEI to 447967-89-400044-0

*2767*2878# -> Custom EEEPROM Reset These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600 type 8889 instead of 9998.

GSM MOTOROLA SECRET MOBILE CODES 

Motorola 

IMEI number: * # 0 6# 
Net Monitor ON: * * * 1 1 3 * 1 * *****91;OK*****93; 
Net Monitor OFF: * * * 1 1 3 * 1 * *****91;OK*****93; 
* - press this until box shown up

To activate RBS:

(pause means the * key held in until box appears)

*****91;pause*****93; *****91;pause*****93; *****91;pause*****93; 1 1 3 *****91;pause*****93; 1 *****91;pause*****93; *****91;ok*****93;

You now have to press the *****91;MENU*****93; and scroll to the 'Eng Field Options' function with the keys, and enable it.

To de-activate RBS,

*****91;pause*****93; *****91;pause*****93; *****91;pause*****93; 1 1 3 *****91;pause*****93; 0 *****91;pause*****93; *****91;ok*****93;

This only works with some versions of software. Please report what works and doesn't for you.

Reported working, by country: 

d460: IT 
6200 Flare: UK (Orange), AU 
7500: IT (model: F16 HW: 5.2 SW: 2.1) 
8200: ES, AU, NL, BE 
8400: IT, NL 
8700: AU, IT, SG, DE, ES, ZA 
Uses of RBS: 

Distance From Base Station - Place a call, when it is answered, press *****91;MENU*****93; until 'Eng Field Option' is displayed, press *****91;OK*****93;, select 'Active Cell', press *****91;OK*****93;, press *****91;MENU*****93; until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Signal Quality - press *****91;MENU*****93; until 'Eng Field Option' is displayed, press *****91;OK*****93;, select 'Active Cell', press *****91;OK*****93;, press *****91;MENU*****93; until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

SONY ERICSSON SECRET CODE 

General Secrets 

IMEI (International Mobile Equipment Identity): *#06#

Firmware Version: >*<<*<* 

Programming Checks: >*<<*<*> or >*<<*<*> 


Accessing the phone without a SIM card: ****04*0000*0000*0000# then on 'Wrong Pin' No 


Reset English Menu: *#0000# 


300, 600, 700 Series 


Programming Menu (Short): 987 + > 


Programming Menu (Long): 923885 + > 


Field Test: 904090 + > (to exit 904090 + >) 


Phone Test: 904059 + > (to exit 3 + <) 


Phone Reset: 904060 + > 


CDMA Mode: 904093 + menu 


Analog Mode: 904095 + menu DM mode 904959 + menu


GSM PHILIPS SECRET CODES 

Philips GENIE


To view IMEI number *#06#

*#2254*# is the statusregister: C, BS, RR, MMI, CREAT.

*#2255*# will activate and deactivate the "DEBUG CALL"-Mode

*#2558*# will display the time in days,hours and minutes you are connected to the GSM network

To force a reconnection to the network, type : *#2562*# 

To view and modify the Security Code of the phone, type: *#7489*# 

To view some info about your SIM card like the phase level, the name, type: *#7378*# 

To obtain information on SIM lock, Init and Flags, press: *#3377*# 

To activate or deactivate Sleep Mode: *#7693*# 

To get info about Sleep Mode: *#8463*# 


Philips FIZZ
IMEI: *#06#

Lock Code: *#1234#

Software Version
To find software version, enter *#8377*#

The output will look something like:

Version : 0916 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

..or extended software version *#5644*#

output:

Version : 09162205 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

SM ALCATEL SECRET MOBILE CODES 

ALCATEL 

* # 0 6 # : IMEI number
* # 0 6 # : Software version
0 0 0 0 0 0 * : Net Monitor

PINOUTS AND CODES FOR PANASONIC MOBILES 

Panasonic G500

IEMI:
To view IMEI number *#06#


--------------------------------------------------------------------------------

PINOUTS

1 - Ground
2 - TX_Audio
3 - Audio_Ground
4 - HF_ON (L=ON) -> L=H/F ON
5 - AOP_Sense <- Data Adaptor Select
6 - Serial_Up <- UART up (9600,33.8kbps)
7 - Serial_Down -> UART down
8 - External_Power <- POWER FOR CHARGING
9 - Ground
10 - RX_Audio
11 - Radio_Mute -> L=MUTE
12 - HF_Sense <- L=H/F MODE
13 - Reserved L=FLASH WRITE ENABLE
14 - Ignition <- H=ON
15 - Logic_Power -> H=HANDSET ON
16 - PAON -> Power Amplifier Control Signal.

**************************************************************************************************** ****
Nokia 3310 Secret codes 
Jul, 08 2003 - 06:20
contributed by: mef
*#06# To find IMEI (International Mobile Equipment Identity) 

*#7780# Restores Factory Settings..(Memory, language, counters not included) 

*#3110# For checking the phone's software (SW) - called firmware revision information. 

*#746025625# *****91;*#sim0clock#*****93; To check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time) 

*#92702689# *****91;*#war0anty#*****93; Phone asks 'warranty code:'

Последний раз редактировалось taa73; 19.01.2010 в 04:33. Причина: Сообщения , идущие подряд, объединены.
KarenMno вне форума   Ответить с цитированием Вверх
Ответ

Опции темы
Опции просмотра Оценка этой теме
Оценка этой теме:

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
Новые версии ПО для UST Pro II Brock UST Pro II 52 18.03.2010 09:51
Подскажите как снять код на ALCATEL kitzon Alcatel 3 09.02.2009 19:28
подскажите код обнуления или форматирования MPx-220 Zloialex Motorola ODM - программный ремонт 2 18.05.2007 21:02
Philips 9@9c подскажите код сброса maxmyd Программный ремонт 3 05.03.2007 11:36


Текущее время: 12:17. Часовой пояс GMT +3.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot