Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[renat_d]

планшет Texet TM-7863 X-pad AIR 8 3G

Рабочий бэкап, нигде в интернете прошивки не нашёл.

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : teXet
Device Model   : X-pad AIR 8 3G (revision 1)
Device CPU     : MT6582
Device IntName : X-pad AIR 8 3G (revision 1)
Device Version : 4.2.2
Device Compile : 21.03.2014 7:40:38
Device Project : ALPS.JB5.TABLET.MP.V1
Device ExtInfo : X-pad AIR 8 3G (revision 1)

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D4331364758056F4FD731F7
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G61CM
[eMMC] : FLASH_CID : 7001004D4D4331364758056F4FD731F7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x000000039A000000
[eMMC] : FLASH_UCP : 14752 MiB [eMMC 16 GiB]
DEV RID    : 0xBBCE715B8A459C506048839579E3D436
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : teXet
ProdName  : X-pad AIR 8 3G (revision 1)
ProdModel : X-pad AIR 8 3G (revision 1)
Device    : X-pad AIR 8 3G (revision 1)
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.TABLET.MP.V1

[Read Ok] : preloader_htt82_tb_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / htt82_tb_jb5 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 751 MiB
Scatter saved to : C:\Documents and Settings\renat\*****204;*****238;*****232; *****228;*****238;*****234;*****243;*****236;*****229;*****237;*****242;*****251;\*****199;*****224;*****227;*****240;*****243;*****231;*****234;*****232;\MT6582__teXet__X-pad_AIR_8_3G_(revision_1)__X-pad_AIR_8_3G_(revision_1)__4.2.2__ALPS.JB5.TABLET.MP.V1\

All done!

Done!
Elapsed: 00:03:54
Reconnect Power/Cable!

[yurii-62]

MT6735 Micromax Q424

Brand : Micromax
ProdName : Micromax Q424
ProdModel : Micromax Q424
Device : Q424
AndroidVer: 5.1
MTKxCPU : MT6735
MTKxPRJ : ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L

Read NVRAM [ v1.57 ]

Operation : Read NVRAM [ v1.57 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D32323732150042858E38F2
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D42001532F2386385
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xE35D677E70894246790486281C928C29
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V8_P13_1_lwg_ n

NVM Read Ok, MT6735_Micromax Q424_S00_MOLY_LR9_W1444_MD_LWTG_MP_V8_P13_1_lwg_n_ eMMC.spnv

Done!

NVM MT6735_Micromax Q424_S00_MOLY_LR9_W1444_MD_LWTG_MP_V8_P13_1_lwg_n_ eMMC.spnv

[slavkinj]

Read firmware

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B375530304D08B359C47FB06F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U7
[eMMC] : FLASH_CID : 1501004B375530304D08B359C47FB06F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x134E2FE33F95273A6BFBF8CD27D1B3B2
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : Lenovo
ProdName : A708t
ProdModel : Lenovo A708t
Device : A708t
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.6

[Read Ok] : preloader_lcsh82_wet_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / lcsh82_wet_jb5 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 762 MiB

[dengerouzzz]

Mts smart start NVRAM

MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_P23_1_wg_n_eMMC.7z

[dengerouzzz]

Fly fs454 NVRAM

MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P2_1_wg_n_eMMC.rar

[F_e_r_z]

в ветке выше есть на 5036d, но там только NVR. Выкладываю полностью с прошивкой.

MT6572__TCT__ALCATEL_ONE_TOUCH_5036D__YarisL_GSM__ 4.2.2__ALPS.JB3.MP.V1

[dengerouzzz]

Philips s396 NVRAM

MT6735_S00_MOLY_LR9_W1444_MD_LWTG_CMCC_MP_V6_P2_1_ltg_n_eMMC.rar

[dengerouzzz]

Билайн Смарт 6 NVRAM

MT6572_S00_MOLY_WR8_W1449_MD_WG_MP_V10_P4_1_wg_n_eMMC.rar

[dengerouzzz]

Копия samsung galaxy E7 (e7000) NVRAM

MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_1_wg_n_eMMC.rar

[F_e_r_z]

Чистейшая свежеслитая прошивка с только что прошитого телефона.

[slavkinj]

Read Firmware

Operation : Read Flash [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 79 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447453001DE9C86F8C179
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 11010030303447453001DE9C86F8C179
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE339E80C24FFBDED2308D048DE
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : alps
ProdName : rtech72_we_72_kk
ProdModel : Sony Xperia Z3
Device : rtech72_we_72_kk
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP6.V1

[Read Ok] : preloader_rtech72_we_72_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / rtech72_we_72_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 898 MiB

[slavkinj]

Read Firmware

Operation : Read Flash [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344732611101A2F70A7C2283
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A48344732611101A2F70A7C2283
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3EB3AF9FBF256C81C6084D074
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : NOMI
ProdName : i400
ProdModel : i400
Device : NOMI
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.V1

[Read Ok] : preloader_hexing72_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hexing72_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 784 MiB

[F_e_r_z]

MT6582__Oysters__Oysters_T72_3G__Oysters__4.2.2__A LPS.JB5.TABLET.MP.V1.12

Прошивка стандартная. Проверено вирусов в прошивке нет.

[kirill@88]

Выкладываю NVRAM

[F_e_r_z]

MT6580__TCL__5025D__PIXI3-55__5.1__ALPS.L1.MP6.V2_JHZ6580.WE.L_P91

[uploads]

PSP3458DUO NV

QUOTE]Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Prestigio
Device Model : TE45B3G
Device CPU : SC7731G
Device IntName : PSP3458DUO
Device Version : 5.1
Device Compile : 18.05.2016 13:04:08
Device Project : PSP3458DUO.20160518.1.0.03
Device ExtInfo : PSP3458DUO[/QUOTE]

[kirill@88]

Выкладываю NVRAM
Глюк движка форума, просьба перенести в соответствующий раздел

[jktuf]

Сообщение от gulka

Ищу прошивку zte blade Q lux 3g
те что в интернете не подходят, видимо ревизия платы другая

есть вот так

[slavkinj]

Read firmware

Operation : Check / Read Info [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642041CA1A1157A257
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642041CA1A1157A257
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0x134E2FE39546A341BBAD7FFF61DA0029
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : alps
ProdName : 706B
ProdModel : NB74
Device : 706B
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.V1.44

SECURITY :
IMEI_SW [1] : 353769354711403
IMEI_SW [2] : 353769354711411
BTMAC Addr : 1099661F391E
WiFi MAC : 900917CAC79B

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V72_1_wg_n

EXTRA :
LCD [0] : $(ROCO_CUST_LCM)
LCD Res : $(ROCO_LCM_HEIGHT)x$(ROCO_LCM_WIDTH)
TOUCH [0] : $(ROCO_TP)
CAM [0] : $(ROCO_MAIN_CAM)
CAM [1] : $(ROCO_SUB_CAM)
MODEM : COMMON_SIM1_3G_850_DATA
LOCALE : $(ROCO_LANGUAGE)

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!

[Bumper]

Сообщение от gulka

Что он хочет млять

Chinese Miracle II  [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6572 , Project : ztenj72_we_72_kk , Storage : EMMC
Files found : 11 , Set to Flash : 10
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : ZTE
Device Model   : P632A10
Device CPU     : MT6572
Device IntName : P632A10
Device Version : 4.4.2
Device Compile : 19.05.2015 10:44:57
Device Project : DIS_R3G_QB18D_P632A10V1.0.1
Device ExtInfo : ZTE T311
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 64 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110186B3BD53B2B9
Initialize Memory ... 
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x20000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110186B3BD53B2B9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x2C5B2F4A067E86EC55491ADEB0C581E6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : ztenj72_we_72_kk , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC NOT supported by BootLoader!
[BL_ERROR] : STORAGE : Break Flashing! This Firmware will kill phone!

Operation Failed
Elapsed: 00:00:27
Reconnect Power/Cable!

Еще вариант на всякий случай....