|
Octopus Box Форум поддержки программатора Octopus Box от GSMServer |
|
Опции темы | Рейтинг: | Опции просмотра |
04.10.2019, 13:02 | #17 |
Супермодератор
Регистрация: 28.03.2009
Адрес: Ставрополь
Сообщений: 2,000
Поблагодарил: 2,044
Поблагодарили 2,603 раз за 1,090 сообщений
Репа: 2317 |
OCTOPLUS FRP TOOL V.1.8.0
Код:
Platform: XIAOMI Selected model: REDMI NOTE 6 PRO Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM20 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000CC0E100000000 QC CPU: Snapdragon 636 SDM636 QC SW VER: 00000004 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Chip SN: E22EDFDA Checking request.. Connecting to server... Checking smart card... Username: yurii Authorizing... Checking balance... Your balance: 197 credits. Checking operation... Operation successfully checked. Sending device information... Get credits, needed for current operation... Your balance: 197 credits. Need: 15 credits. Start Authentication... Connecting to server..OK Authorizing...OK Initializing..OK Calculating... Authentication done! Checking request.. Reading partition... Reading info... Brand: xiaomi Model: Redmi Note 6 Pro Device: tulip Android version: 9 Display ID: PKQ1.180904.001 Firmware version: V10.3.5.0.PEKMIXM Writing firmware... Selected firmware files: C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\rawprogram0.xml C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\patch0.xml Opening "C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\rawprogram0.xml"... Writing storsec... Writing storsecbak... Writing rpm... Writing rpmbak... Writing hyp... Writing hypbak... Writing pmic... Writing pmicbak... Writing cmnlib... Writing cmnlibbak... Writing cmnlib64... Writing cmnlib64bak... Writing abl... Writing ablbak... Writing devcfgbak... Writing devcfg... Writing tz... Writing tzbak... Writing mdtpsecapp... Writing mdtpsecappbak... Writing keymaster... Writing keymasterbak... Writing bluetooth... Writing xbl... Writing xblbak... Writing dsp... Writing mdtp... Writing splash... Writing modem... Writing boot... Writing recovery... Writing cache... Writing system... Writing vendor... Writing cust... Writing userdata... Writing PrimaryGPT... Writing BackupGPT... Opening "C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\patch0.xml"... Writing Patch... Firmware Write successfully. Rebooting phone Backup saved as xiaomi_Redmi Note 6 Pro_04-10-2019_12-48-52.dump file Performed by 1.8.0.0 Software version.
__________________
Век живи, век учись.. |
Следующие пользователи поблагодарили yurii-62 за это сообщение: | uploads (04.10.2019) |
|
|
Похожие темы | ||||
Тема | Автор | Раздел | Ответов | Последнее сообщение |
Новости и обновления ПО Octoplus FRP Tool. | yurii-62 | Octopus Box | 59 | 11.10.2023 18:24 |
Обновления z3x Samsung Box | Despedo | Z3X Samsung Tool | 48 | 11.06.2023 20:44 |
Новости и обновления ПО Octopus LG | varalex | Octopus Box | 260 | 12.03.2020 21:33 |
Большое обновление от Z3x Team Samsung PRO - 22.8 Note 5/ S6 Egde+ write cert/direct unlock | DB2020_Logs | Новости и последние события по тематике форума | 2 | 13.11.2015 01:33 |