GSM Форум - GSMForum.SU - Nokia 105 RM-908 после прошивки не включается

Добрый день. Принесли мне на прошивку этот чудо аппарат. Была версия 3.40. После прошивки перестал включаться. Читается и шьётся ATF прекрасно. В логах ATF проблемы тоже не вижу. Кто сталкивался с подобным.
P.S. Аппарат новый только из коробки.

Код:

Booting Phone...



Booting Phone...



Booting Phone...



Booting Phone...

VBATT Powering Down <<<<

VBATT Powering Up   >>>>

SET VCCIO Level Done

SET BSI Load Done



Booting Phone...

CPU ID Response: A200341100

CPU Type: XG110 2.1B

Phone Booted after 5 attempts...



************************************************************************************************************

                  TIME STARTS HERE                      

************************************************************************************************************





Sending PBL 19456 bytes...

PBL Successfully Sent...



Sending SBL 65024 bytes...

SBL Successfully Sent...

Flash Chip Manufacturer ID: 0x00EF

Flash Chip Type: 64 Mbit (4Mb x 16) NOR

Extended Information: Multi-Bank / 1.8v



Processing Image File: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-908\rm908_mcu_03.400



 Data Block Found...

Number of Sections: 03

IMAGE Certificate Block Sent Successfully...

 Processing Section 01 of 03

IMAGE Erase Block: 0x00800000~0x00A0FFFE

Start Erasing...

Erasing Please Wait...

Block Erase Done...

Preparing Data Blocks...

Data Size: 2162688 bytes

Data Checksum: 0551

Uploading Data Blocks to phone...

IMAGE Data Blocks uploaded to phone...

 Processing Section 02 of 03

IMAGE Erase Block: 0x00C60000~0x00EAFFFE

Start Erasing...

Erasing Please Wait...

Block Erase Done...

Preparing Data Blocks...

Data Size: 2232896 bytes

Data Checksum: 89F6

Uploading Data Blocks to phone...

IMAGE Data Blocks uploaded to phone...

 Processing Section 03 of 03

IMAGE Erase Block: 0x00FFC000~0x00FFFFFE

Start Erasing...

Erasing Please Wait...

Block Erase Done...

Preparing Data Blocks...

Data Size: 64 bytes

Data Checksum: 0000

Uploading Data Blocks to phone...

IMAGE Data Blocks uploaded to phone...

Start Data Verification... (Please wait)

Data Verification Successful...





Processing Image File: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-908\RM908_0590000_03.40_001.vpl





Exit Flash Mode Done...

Time Elapse : 00:01:15



************************************************************************************************************

    You must Factory Reset the phone to enable the     

   ringtones and other  customized settings to work    

************************************************************************************************************





 Waiting For Phone to go Online...



 5,  4,  3,  2,  1...

MCU: V 03.40 08-08-13 RM-908 (c) Nokia

IMEI: 359967058329571 

Product Serial Number: 0B570C8AU

Product Code         : 059R488

Module Code          : 0205453

Basic Production Code: 059T865

PPM SW Version       : V 03.40 08-08-13 RM-908 (c) Nokia MG

ADSP Version         : p no NAI version

MCU SW Version       : V 03.40 08-08-13 RM-908 (c) Nokia

HW Version           : 3000

UEM Version          : 1328

UPP Version          : 8850

LCD Version          : WIN:BEIHAIv82 ILI9163C

  ******************** SIMLOCK INFO  ******************** 

CONFIG_DATA  : 0010100000000000

PROFILE_BITS : 0000000000040002

ASIC         : 11

PROVIDER     : Default Test Operator



   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open

   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open

   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open

   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open

   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open

   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open

   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open

ST_LCD_TEST               : PASSED



FACTORY SET TO : Full Factory Set

 OK

FACTORY SET TO : User Data

 OK

FACTORY SET TO : Leave Factory

 OK

FACTORY SET TO : Service Center

 OK

FACTORY SET TO : Software Upgrade

 OK

FACTORY SET TO : Production Tune

 OK