GSM Форум - GSMForum.SU

GSM Форум - GSMForum.SU (https://gsmforum.su/index.php)
-   RIFF Box JTAG (https://gsmforum.su/forumdisplay.php?f=382)
-   -   i8510 не получается восстановить PDA (https://gsmforum.su/showthread.php?t=77372)

nikodim83 15.03.2011 18:08

i8510 не получается восстановить PDA
 
Код:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.20, JTAG Manager Version: 1.28
Selected Resurrector: [Samsung i8510 PDA]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3602F - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

Если я правильно понял, это означает что умерла флешка? Или подобный лог возможен при какихто других дефектах? (запаяна PDA часть, NRST запаян в модемной... вроде все верно...)

sarry 15.03.2011 18:24

Это может значить,что стоит попробовать изменить скорость,как вариант

nikodim83 15.03.2011 18:49

Цитата:

Сообщение от sarry (Сообщение 375999)
Это может значить,что стоит попробовать изменить скорость,как вариант

Код:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.20, JTAG Manager Version: 1.28
Selected Resurrector: [Samsung i8510 PDA]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3602F - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

Код:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.20, JTAG Manager Version: 1.28
Selected Resurrector: [Samsung i8510 PDA]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3602F - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 100 kHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.


nikodim83 17.03.2011 14:01

Чтоже кроме неисправности самой флехи может приводить к такому сообщению? -
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.
Оборудование исправно, проверил на S5230-
Код:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.20, JTAG Manager Version: 1.28
Selected Resurrector: [Samsung S5230]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x002C/0x00BA (256MB)
Flashing the dead body...OK
Resurrection complete!

Телефон(i8510) не моченый, следов удара нет. На практике у этих моделей битые флешки у кого-нибудь встречались?

levsha 22.03.2011 11:00

Вероятнее всего у этого телефона "железная" проблема.


Текущее время: 20:04. Часовой пояс GMT +3.

Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot