Распиновка разъема Motorola E396

[erd]

Всем привет!
Подскажите распиновка разъемов Motorola E396

[erd]

Вот смотри здесь (http://gsmforum.su/showthread.php?p=251856#post251856) они стандартные
Млин ссылка обратно на мой пост возвращает :confused:

[deadmoroz]

смотри здесь: http://pinouts.ru/CellularPhones-A-N/motorola_v60.shtml

[Dimon_daemon]

also for ROKR E1, E398,E550,E815,E1000, T280,T720,T730,T722i,T721, 270c, C331t, C343, C353t, C975, C980, 120x, A920, A295, Nextel i205, i305, i530, i730, i830, i930 models. This interface also known as Motorola CE bus.
Mobile phone interface pin Description
1 GND
2 R=25 or 33 KOhm to GND in data or charge cable
3 +6v charge voltage
4 Tx
5 Rx
6 RTS
7 Vbus (connect to pin 3 if not used as IC power)
8 CTS
9 DCD
10 RE
11 DTR
12 DSR
13 Serial Enable (if this pin is not pulled to ground your serial cable will not work)
Pins 6,8; pins 13 and 1 should be shorted in cable.

USB pinout (used at least in Motorola Nextel i205, i305, i530, i730, i830, i930).
Mobile phone interface pin Description
1 GND
4 Rx (may be connected to PC USB port, USB D+)
5 Tx (may be connected to PC USB port, USB D-)
6 VBus May be pin 7???
For v600 whith charge, pin 3 and 6 be shorted. USB D+ connect to pin4, USB D- connect to pin5. R=25 KOhm connect to pin1 and pin2. Do not pin 3 and 6 shorted in phone, must be in cable!

[erd]

спасибо всем кто мне ответил.
Тему прошу закрыть