Motorola A925 ошибка запуска !!

[mservice]

Включаю телефон идет загрузка Motorola A925 потом вылазит ошибка:

Program closed
----------------------------
Program PhBkSyncServer
Reason code KERN-EXEC
Reason number 3
----------------------------

И все далше не грузится !
Пробовал шить версии:
A925_BP_30.94.00_flash
A925_BP_30.95.00.flash
ПРОБЛЕММА НЕ ИСПРАВИЛАСЬ !!!
Больше на сайте поддержки ничего нету !


Need Help !!!!

[gsi]

у меня тоже такая проблема помогите пожалуйста мужики!
С Multi Flash Flex Tool ом и RSD ом не прошивается ошибкы дает?

[Гарри Поттерр]

шить нужно small flash, не full.

[mcandre]

mservice,
A925 - проблемный в плане восстановления телефон.
Нашел для тебя такую инфу (правда, на английском) - надеюсь, что поможет:

Software Version on A920 or A925 can be read by clicking Control Panel icon => Handset Information


TO: Flash: Version (AP): REL_30.80.20 Flex: SA1362A00B AP Boot Loader: 01.01.54
Needed files: Flash: REL_30.80.20_SA1362A_001_BP.shx Flex file: SA1362A00B.hs, AP Boot-loader file: xxx_xxx_010154.m0
IMPORTANT NOTE: Refer to Table A to select correct AP Bootloader file for phone based on hardware type


Software Tools.
1) For Boot Loader programming:
• Use Windows HyperTerminal application (Process on page 2)
2) For Flashing and Flexing:
• MUST USE PST VERSION 6.2.1 or higher, or MultiFlashFlex v1.8 or higher, or Radiocomm 6.4 or higher (PST and Radiocomm process on page 3)

Basic Process:
1) Upgrade AP Bootloader file to 01.01.54 if unit has lower version than 01.01.53
2) Flash file REL_30.80.20_SA1362A_001_BP.shx into phone
3) Flex file SA1362A00B.hs into phone
4) Perform Master Clear and then Master Reset via phone user menu.


Flashing and Flexing Notes:
Force flash mode (flashing only, and NOT flexing): Force flash mode simply speeds up the flashing process by forcing USB enumeration (detecting USB on computer and displaying small icon on PST Flash and test commands a bit faster saving you time). The phone can be flashed in Force Flash mode or NOT using Force Flash mode (powering up normally). Force Flash mode can be activated on the A920/925 by holding down both phone game buttons (at top of phone) and while inserting the USB cable plugged into the PC with the charger installed in the cable (battery not even needed). You will be able to read the AP Boot-Loader version on the phone screen if Force Flash mode is activated correctly (black background with white letters)…

Boot Loader Programming:

Upgrading A920 or A925 AP Boot Loader from 01.01.xx to 01.01.54 (see Table A below for correct file based on hardware type).

http://img231.imageshack.us/img231/9915/11111gg4.th.png (http://img231.imageshack.us/my.php?image=11111gg4.png)


The Boot Loader version can be checked by putting the phone in Force Flash Mode using USB Cable and harger (battery not needed). However the Boot Loader must be programmed using the RS232 Cable and adapter, and Windows HyperTerminal application.

The step-by-step upgrade procedure for upgrading the Boot Loader is outlined below:

1) Start the Hyper Terminal utility on your PC (Start/Programs/Accessories/Communications)
2) It must be set up for:
- The Serial COM port you connect the phone to. Then under "Configure"
- Bits per second: 115200
- Data bits: 8
- Parity: None
- Stop Bits: 1
- Flow Control: None
3) Connect the phone without a battery to your PC, using the straight through serial cable with adapter with the power connected to the CE connector while holding the 2 game buttons down. Once the cable is connected, release the games buttons.
4) On the HyperTerminal screen, you should see the list of options labeled 0 through 99 (not every number is in the list). Press RETURN if you do not see the menu option.
5) Type 99 and hit RETURN (selecting option 99) - You should see CCCC... appearing in the HyperTerminal window
6) Click on Transfer
7) Click on Send File
8) Select the xxx_xxx_010154.m0 file that is to be sent
9) Set Protocol to Xmodem
10) Click on Send
11) When the install is complete, approx. 1/2 minute, cycle power to the phone.
12) After power cycling the phone, verify the new boot loader version on the phones display by repeating step 3
13) Note that you can save the HyperTerminal session so you can recall the set up quickly for additional Boot Loader upgrades


FLASHING (ex. PST 6.2.1 Flash & Test Commands)
1 Connect USB cable to PC and USB port and turn on phone (putting phone in force Flash mode is optional). Run PST Flash and Test Command option and load Flash file: REL_30.80.20_SA1362A_001_BP.shx
2 Double click Motorola P2K icon (Blank A920 Paragon should appear in Platform Type box and Flash and Verify buttons should become black if loaded properly. “AP is on CE-Bus PST Connected” message should also appear on phones display (along with boot loader version – (bootloader on phone should be 01.01.54)
3 Press Flash button – flashing successfully on a Pentium 4 computer should Complete in ~ 4 minutes (slower computers ~ 6+ minutes)
4 Verify software version info in phone Control Panel Icon=> Handset Information screen